MCQ
Calculate the surface integral of a magnetic field over a surface.
- AMaximum
- BMinimum
- CZero
- ✓Equal to its magnetic flux through that surface.
✓
Answer
Correct option: D.
Equal to its magnetic flux through that surface.
he Gauss’s law states that the surface integral of a magnetic field over a closed surface is always zero. But the surface integral of a magnetic field over a surface gives magnetic flux through that surface.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A photon will have less energy, if its:
The current through a $4.6\, H$ inductor is shown in the following graph. The induced emf during the time interval $t = 5\, milli-sec$ to $6\,milli-sec$ will be
→In space of horizontal $EF$ ($E = (mg)/q$) exist as shown in figure and a mass $m$ attached at the end of a light rod. If mass $m$ is released from the position shown in figure find the angular velocity of the rod when it passes through the bottom most position
→A passenger in an aeroplane shall:
A parallel plate capacitor of area $A$, plate separation $d$ and capacitance $C$ is filled with three different dielectric materials having dielectric constants ${k_1},{k_2}$ and ${k_3}$ as shown. If a single dielectric material is to be used to have the same capacitance $C$ in this capacitor, then its dielectric constant $k$ is given by
→Four point charges $-q, +q, +q$ and $-q$ are placed on $y$ axis at $y = -2d$, $y = -d, y = +d$ and $y = +2d$, respectively. The magnitude of the electric field $E$ at a point on the $x -$ axis at $x = D$, with $D > > d$, will vary as
→Gauss is unit of which quantity
The magnet can be completely demagnetized by
Two slits are separated by $0.3\, mm$. $A$ beam of $500\, nm$ light strikes the slits producing an interference pattern. The number of maxima observed in the angular range $- 30^o < \theta < 30^o.$
→An $AC$ circuit has $R =100 \Omega, C =2\, \mu F$ and $L =80\, mH ,$ connected in series. The quality factor of the circuit is$.......$
→