Question
Describe the method of determining coefficient of viscosity.

Answer

SELF

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

The potential energy of a spring when stretched through a distance x is 25J. What is the amount of work done on the same spring so as to stretch it by an additional distance 5x ?
Two small balls, each of mass m are connected by a light rigid rod of length L. The system is suspended from its centre by a thin wire of torsional constant k. The rod is rotated about the wire through an angle $\theta_0$ and released. Find the tension in the rod' as the system passes through the mean position.
A rectangular box lies on a rough inclined surface. The coefficient of friction between the surface and the box is $\mu$. Let the mass of the box be m.
  1. At what angle of inclination $\theta$ of the plane to the horizontal will the box just start to slide down the plane?
  2. What is the force acting on the box down the plane, if the angle of inclination of the plane is increased to a $\theta>$?
  3. What is the force needed to be applied upwards along the plane to make the box either remain stationary or just move up with uniform speed?
  4. What is the force needed to be applied upwards along the plane to make the box move up the plane with acceleration a?
Figure. shows two vessels $A$ and $B$ with rigid walls containing ideal gases. The pressure, temperature and the volume are $p_A, T_A, V$ in the vessel $A$ and $p_B, T_B, V$ in the vessel $B$. The vessels are now connected through a small tube. Show that the pressure p and the temperature T satisfy $\frac{\text{p}}{\text{T}}=\frac{1}{2}\Big(\frac{\text{P}_\text{A}}{\text{T}_\text{A}}+\frac{\text{p}_\text{B}}{\text{T}_\text{B}}\Big)$ when equilibrium is achieved.
A mica strip and a polysterene strip are fitted on the two slits of a double slit apparatus. The thickness of the strips is $0.50mm$ and the separation between the slits is $0.12cm$. The refractive index of mica and polysterene are $1.58$ and $1.55$ respectively for the light of wavelength $590nm$ which is used in the experiment. The interference is observed on a screen a distance one meter away.
  1. What would be the fringe-width?
  2. At what distance from the centre will the first maximum be located?
A composite wire of diameter 1 cm consisting of copper and steel wire of lengths 2.2 m and 2.0 m respectively. Total extension of the wire, when stretched by a force is 1.2 mm . Calculate the force given that Young's modulus for copper is $1.1 \times 10^{11} \mathrm{~Pa}$ and for steel is $2.0 \times 10^{11} \mathrm{~Pa}$.
An incident wave and a reflected wave are represented by
$\xi_1=\text{a}\sin\frac{2\pi}{\lambda}(\nu\text{t}-\text{x})$
$\xi_2=\text{a}\sin\frac{2\pi}{\lambda}(\nu\text{t}+\text{x})$
Derive the equation of the stationary wave, and calculate the position of the nodes and antinodes.
Show that when a string fixed at its two ends vibrates in 1 loop, 2 loops, 3 loops and 4 loops, the frequencies are in the ratio 1 : 2 : 3 : 4.
A capacitor having a capacitance of $100\mu\text{F}$ is charged to a potential difference of $50V$.
  1. What is the magnitude of the charge on each plate?
  2. The charging battery is disconnected and a dielectric of dielectric constant $2.5$ is inserted. Calculate the new potential difference between the plates.
  3. What charge would have produced this potential difference in absence of the dielectric slab.
  4. Find the charge induced at a surface of the dielectric slab.
A body executing linear SHM has a velocity of $3cms^{-1}$ when its displacement is $4cm$ and a velocity of $4cms^{-1}$ when its displacement is $3cm$.
  1. Find the amplitude and period of the oscillation.
  2. If the mass of the body is $50g$, calculate the total energy of oscillation.