MCQ
Dimensional formula $M{L^{ - 1}}{T^{ - 2}}$ does not represent the physical quantity
- AYoung's modulus of elasticity
- BStress
- ✓Strain
- DPressure
✓
Answer
Correct option: C.
Strain
c
(c) Strain $ = \frac{{\Delta L}}{L} \Rightarrow $ dimensionless quantity
(c) Strain $ = \frac{{\Delta L}}{L} \Rightarrow $ dimensionless quantity
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
The circuit is equivalent to
What will be the formula of mass of the earth in terms of $g, R$ and $G$ ?
→Two satellites $S_{1}$ and $S_{2}$ are revolving around a planet in the opposite sense in coplanar circular concentric orbits. At time $t=0$, the satellites are farthest apart. The periods of revolution of $S_{1}$ and $S_{2}$ are $3 \,h$ and $24 \,h$, respectively. The radius of the orbit of $S_{1}$ is $3 \times 10^{4} \,km$. Then, the orbital speed of $S_{2}$ as observed from
→Two $ PN-$junctions can be connected in series by three different methods as shown in the figure. If the potential difference in the junctions is the same, then the correct connections will be
→Average velocity of a particle executing $SHM$ in one complete vibration is
→The kinetic energy of translation of $20\, gm$ of oxygen at $47°C$ is (molecular wt. of oxygen is $32 \,gm/mol$ and $R = 8.3\, J/mol/K)$
→Two bulbs consume same power when operated at $200\, V$ and $300\, V$ respectively. When these bulbs are connected in series across a $D.C$. source of $500\, V$, then
→Which of the following cylindrical rods will conduct most heat, when their ends are maintained at the same steady temperature
Temperature can be expressed as a derived quantity in terms of any of the following
A uniform heating wire of resistance $36\, \Omega$ is connected across a potential difference of $240\, {V}$ The wire is then cut into half and potential difference of $240\, {V}$ is applied across each half separately. The ratio of power dissipation in first case to the total power dissipation in the second case would be $1: {x}$, where ${x}$ is........... .
→