Question
Explain linear density, surface density and volume density for continuous charge distribution.
✓
Answer
(1) Linear distribution of electric charge.
►If there is a continuous electric charge on a line, it is called linear distribution of electric charge.
►The electric charge per unit length on an electrically charged line is called linear density of electric charge.
►Assume there is a total charge of Q on the line length of $l$.
►Linear density of charge,
$\lambda=\frac{\text { Total electric charge }}{\text { length }}=\frac{ Q }{l}$
SI unit of linear density is $C / m$
(2) Surface distribution of charge :
If there is a continuous electric charge on a surface, it is called surface distribution of charge.
►The electric charge per unit surface is called surface density of charge.
►Assume there is a total charge of Q on the Surface of Area A,
$\therefore$ Surface density of charge,
$\sigma=\frac{\text { Total electric ch arge }}{\text { Area }}=\frac{ Q }{ A }$
►SI unit : $C / m ^2$
(3) Volume distribution of charge :
If there is a continuous electric charge on a volume, it is called volume distribution of charge.
►The electric charge per unit volume is called volume density of charge.
►Assume there is a total charge Q on the matter with volume V ,
$\therefore$ Volume density of charge
$\Omega=\frac{\text { Total ch arg } e }{\text { volume }}=\frac{ Q }{ V }$
►SI unit : C $/ m ^3$
►If there is a continuous electric charge on a line, it is called linear distribution of electric charge.
►The electric charge per unit length on an electrically charged line is called linear density of electric charge.
►Assume there is a total charge of Q on the line length of $l$.
►Linear density of charge,
$\lambda=\frac{\text { Total electric charge }}{\text { length }}=\frac{ Q }{l}$
SI unit of linear density is $C / m$
(2) Surface distribution of charge :
If there is a continuous electric charge on a surface, it is called surface distribution of charge.
►The electric charge per unit surface is called surface density of charge.
►Assume there is a total charge of Q on the Surface of Area A,
$\therefore$ Surface density of charge,
$\sigma=\frac{\text { Total electric ch arge }}{\text { Area }}=\frac{ Q }{ A }$
►SI unit : $C / m ^2$
(3) Volume distribution of charge :
If there is a continuous electric charge on a volume, it is called volume distribution of charge.
►The electric charge per unit volume is called volume density of charge.
►Assume there is a total charge Q on the matter with volume V ,
$\therefore$ Volume density of charge
$\Omega=\frac{\text { Total ch arg } e }{\text { volume }}=\frac{ Q }{ V }$
►SI unit : C $/ m ^3$
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
The voltage and current in a series AC circuit are given by, $\text{V}=\text{V}_0\cos\omega\text{t}$ and $\text{i}=\text{i}_0\sin\omega\text{t}.$ What is the power dissipated in the circuit?
→A hollow sphere of radius R lies on a smooth horizontal surface. It is pulled by a horizontal force acting tangentially from the highest point. Find the distance travelled by the sphere during the time it makes one full rotation.
An electric bulb is marked $220 V, 100 W$. Calculate : (i) resistance of the bulb (ii) peak voltage of the source (iii) rms current flowing through the bulb.
→In Figure, $\varepsilon_1$ and $\varepsilon_2$ are respectively 2.0 V and 4.0 V and the resistances $r _1, r _2$ and R are respectively $1.0 \Omega$ $2.0 \Omega$ and $5.0 \Omega$. Calculate the current in the circuit. Also, calculate:
i. potential difference between the points b and a,
ii. potential difference between a and c.
→i. potential difference between the points b and a,
ii. potential difference between a and c.
State the underlying principle of working of a moving coil galvanometer. Write two reasons why a galvanometer can not be used as such to measure current in a given circuit. Name any two factors on which the current sensitivity of a galvanometer depends.
An AC source of voltage $\text{V = Vm}\sin\omega\text{t}$ is applied across a series LCR circuit. Draw the phasor diagrams for this circuit, when,
→- Capacitive impedance exceeds the inductive impedance.
- Inductive impedance exceeds capacitive impedance.
A human body excretes (removes by waste discharge, sweating, etc.) certain materials by a law similar to radioactivity. If technetium is injected in some form in a human body, the body excretes half the amount in 24 hours. A patient is given an injection containing $^{99}Tc.$ This isotope is radioactive with a half-life of 6 hours. The activity from the body just after the injection is $6\mu\text{Ci}.$ How much time will elapse before the activity falls to $3\mu\text{Ci}?$
→An electric field of $20NC^{-1}$ exists along the x-axis in space. Calculate the potential difference $V_B - V_A$ where the points A and B are given by,
→- $A = (0, 0); B = (4m, 2m)$
- $A = (4m, 2m); B = (6m, 5m)$
- $A = (0, 0); B = (6m, 5m)$
Explain electrostatic potential.
- Describe briefly the functions of the three segments of n-p-n transistor.
- Draw the circuit arrangement for studying the output characteristics of n-p-n transistor in CE configuration. Explain how the output characteristics is obtained.