MCQ
In heat transfer, which method is based on gravitation
- ✓Natural convection
- BConduction
- CRadiation
- DStirring of liquids
✓
Answer
Correct option: A.
Natural convection
(a) Natural convection arises due to difference of density at two places and is a consequence of gravity.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A galvanometer of resistance $36 \Omega$ is changed into an ammeter by using a shunt of $4 \Omega$. The fraction $f$ of total current passing through the galvanometer is
→Work done in the given $P$ - $V$ diagram in the cyclic process is
→A sample of ideal monoatomic gas is taken round the cycle $A B C A$ as shown in the figure. The work done during the cycle is
→Spot the wrong statement : The acceleration due to gravity ' $g$ ' decreases if
→Joule-second is the unit of
A thin metal disc of radius $r$ floats on water surface and bends the surface downwards along the perimeter making an angle $\theta$ with vertical edge of the disc. If the disc displaces a weight of water $W$ and surface tension of water is $T$, then the weight of metal disc is
→A force $F$ is applied on the wire of radius $r$ and length $L$ and change in the length of wire is $l$. If the same force $F$ is applied on the wire of the same material and radius $2 r$ and length $2 L$, Then the change in length of the other wire is
→If $\gamma=2.5$ and volume is equal to $\frac{1}{8}$ times to the initial volume then pressure $P^{\prime}$ is equal to (Initial pressure $=P$ )
→A shunt of resistance $1\,\Omega $ is connected across a galvanometer of $120\,\Omega $ resistance. A current of $5.5\, ampere$ gives full scale deflection in the galvanometer. The current that will give full scale deflection in the absence of the shunt is nearly ............... $ampere$
→Shown in the figure is a circular loop of radius $r$ and resistance $R$. A variable magnetic field of induction $B=B_0 e^{-t}$ is established inside the coil. If the key $(K)$ is closed, the electrical power developed right after closing the switch is equal to
→