Question
In $P-$type semiconductor, there is
✓
Answer
(b)Absence of one electron, creates the positive charge of magnitude equal to that of electronic charge.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
The length of second's hand in watch is $1 \,cm.$ The change in velocity of its tip in $15$ seconds is
→A shell is fired at a speed of $200\ m/s$ at an angle of $37^o$ above horizontal from top of a tower $80\ m$ high. At the same instant another shell was fired from a jeep travelling away from the tower at a speed of $10\ m/s$ as shown. The velocity of this shell relative to jeep is $250\ m/s$ at an angle of $53^o$ with horizontal. Find the time (in $sec$) taken by the two shells to come closest.
→If in a coil rate of change of area is $5$ m$^2$/milli second and current become $1 \,amp$ from $2\, amp$ in $2 \times {10^{ - 3}}\,sec.$ If magnitude of field is $1$ tesla then self inductance of the coil is....$H$
→A ball is projected upwards from the top of a tower with a velocity of $50\, ms^{-1}$ making an angle of $30^o$ with the horizontal. The height of the tower is $70\, m$. After how many seconds from the instant of throwing will the ball reach the ground ?.......$s$
→$A$ thin rod $AB$ is sliding between two fixed right angled surfaces. At some instant its angular velocity is $ \omega $. If $I_x$ represent moment of inertia of the rod about an axis perpendicular to the plane and passing through the point $X$ ($A, B, C$ or $D$), the kinetic energy of the rod is
→A solenoid has an inductance of $60 \,henrys$ and a resistance of $30 \,ohms$. If it is connected to a $100 \,volt$ battery, how long will it take for the current to reach $\frac{{e - 1}}{e} \approx 63.2\% $ of its final value
→Work done by a frictional force is
Potential energy of a satellite having mass $‘m’$ and rotating at a height of $6.4 \times {10^6}\,m$ from the earth surface is
→A copper wire of resistance $R$ is cut into ten parts of equal length. Two pieces each are joined in series and then five such combinations are joined in parallel. The new combination will have a resistance
→The capacitance of a parallel plate condenser does not depend on