MCQ
In the circuit initially switch $S$ is open the $S$ is closed at $t = 0$ the difference between the maximum and minimum current that can flow in the circuit is.....$Amp$
- A$2$
- B$3$
- ✓$1$
- DNothing can be concluded
✓
Answer
Correct option: C.
$1$
c
Just after $\mathrm{S}$ is closed $\mathrm{i}=\frac{10}{10}=1$ $\mathrm{amp}$
Just after $\mathrm{S}$ is closed $\mathrm{i}=\frac{10}{10}=1$ $\mathrm{amp}$
Long after $\mathrm{S}$ is closed $= \mathrm{i}=\frac{10}{5}=2 \mathrm{\,amp}$
difference $=1$ $\mathrm{amp}$
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A charge $Q$ moves parallel to a very long straight wire carrying a current $l$ as shown. The force on the charge is
→If satellite is shifted towards the earth. Then time period of satellite will be
A rocket can go vertically upwards in earth's atmosphere because
$A$ student calculates the acceleration of $m_1$ in figure shown as ${a_1} = \frac{{({m_1} - {m_2})\,g}}{{{m_1}\, + \,{m_2}}}\,$. Which assumption is not required to do this calculation.
→Which of the following cannot be obtained from an $IC$?
→A cannon ball is fired with a velocity $200\, m/sec$ at an angle of $60^o$ with the horizontal. At the highest point of its flight it explodes into $3$ equal fragments, one going vertically upwards with a velocity $100\, m/sec$, the second one falling vertically downwards with a velocity $100\, m/sec$. The third fragment will be moving with a velocity
→At temperature $T$ , the power radiated by a body is $Q$ watts. At the temperature $3T$ the power radiated by it will be
→In a circuit, the current lags behind the voltage by a phase difference of $\pi /2.$ The circuit contains which of the following
→Two ideal slits $S_1$ and $S_2$ are at a distance d apart, and illuminated by light of wavelength $\lambda$ passing through an ideal source slit $S$ placed on the line through $S_2$ as shown. The distance between the planes of slits and the source slit is $D$. A screen is held at a distance $D$ from the plane of the slits. The minimum value of d for which there is darkness at $O$ is
→A heap of rope with mass density $\lambda $ (per unit length) lies on a table. You grab one end and pull horizontally with constant speed $v$ , as shown in figure. (Assume that the rope has no friction with itself in the heap.) The force that you must apply to maintain the constant speed $v$ is
→