MCQ
In the following common emitter configuration an NPN transistor with current gain b = 100 is used. The output voltage of the amplifier will be
- A10 mV
- B0.1 V
- ✓1.0 V
- D10 V
✓
Answer
Correct option: C.
1.0 V
(c) 1.0 V
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
$A$ and $B$ are two radioactive substances whose half lives are $1$ and $2$ years respectively. Initially $10\, g$ of $A$ and $1\,g$ of $B$ is taken. The time (approximate) after which they will have same quantity remaining is ........... $years$
→Change in number of magnetic field lines induces.
What will be the colour of sky as seen from the earth, if there were no atmosphere
The ratio of resolving powers of an optical microscope for two wavelengths $\lambda_1 = 4000\,\mathring A$ and $\lambda_2 = 6000 \,\mathring A$ is
→When a magnet is pushed in and out of a circular coil $C$ connected to a very sensitive galvanometer $G$ as shown in the adjoining diagram with a frequency $\nu $, then
→Light from a point source in air falls on a convex curved surface of radius $20 \mathrm{~cm}$ and refractive index $1.5.$ If the source is located at $100 \mathrm{~cm}$ from the convex surface, the image will be formed at $\mathrm{cm}$ from the object.
→Assertion : The 200 W bulbs glows with more brightness then 100 W bulbs.
Reason : A 100 W bulb has more resistance than a 200 W bulb.
Reason : A 100 W bulb has more resistance than a 200 W bulb.
Lens used to remove long sightedness (hypermetropia) is
A hollow sphere of charge does not have electric field at:
A current of 2 A flows in a system of conductors as shown. The potential difference $(V_A - V_B)$ will be
→