MCQ
In which thermodynamic process, volume remains same
  • A
    Isobaric
  • B
    Isothermal
  • C
    Adiabatic
  • Isochoric

Answer

Correct option: D.
Isochoric
Isochoric

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

There is a hole of area $A$ at the bottom of cylindrical vessel. Water is filled up to a height $h$ and water flows out in $t$ second. If water is filled to a height $4 h$, it will flow out in time equal to
In the circuit shown here, the readings of the ammeter and voltmeter are

Image

The potential energy of a simple harmonic oscillator when the particle is half way to its end point is (where $E$ is the total energy)
When $100$ volts dc is supplied across a solenoid, a current of $1.0$ amperes flows in it. When $100$ volts ac is applied across the same coil, the current drops to $0.5$ ampere. If the frequency of ac source is $50\ Hz$, then the impedance and inductance of the solenoid are
A body is thrown vertically up from the ground. It reaches a maximum height of $100 m$ in $5 sec$. After what time it will reach the ground from the maximum height position
Water rises in a capillary tube to a certain height such that the upward force due to surface tension is balanced by $75 \times 10^{-4} \mathrm{~N}$ force due to the weight of the liquid. If the surface tension of water is $6 \times 10^{-2} \mathrm{Nm}^{-1}$, the inner circumference of the capillary must be
There is no couple acting when two bar magnets are placed coaxially separated by a distance because
water containing vessel, the level of water An ice block contains a glass ball when the ice melts within the
A star is moving towards the earth with a speed of $4.5 \times 10^6 m / s$. If the true wavelength of a certain line in the spectrum received from the star is $5890 \mathring A$, its apparent wavelength will be about $\left[c=3 \times 10^8 m / s \right]$
The quantity of heat which crosses unit area of a metal plate during conduction depends upon