Question
Let iE, iC and iB represent the emitter current, the collector current and the base current respectively in a transistor. Then,
  1. iC is slightly smaller than iE.
  2. iC is slightly greater than iE.
  3. iB is much smaller than iE.
  4. iB is much greater than iE.

Answer

  1. iC is slightly smaller than iE.

  1. iB is much smaller than iE.

Explanation:

The highlighted parts could not be edited, as the meaning could not be understood. Also, please check the last line for logical accuracy. Only one option is given as correct, while the solution gives two correct options.

We know that in the transistor base is slightly doped, therefore when the majority carriers due to forward biasing of emitter base junction, feel the repulsive force from the battery and pass over to the base region. This gives the emitter current iE.

As the base is thin and lightly doped, only few majority carriers of the emitter are neutralised at the base. This gives the base current.

Hence, base current (iB) is low.

The remaining majority carriers of the emitter pass to the collector and give collector current iC.

Thus, we get the relation given below:

iE = iB + iC

Thus, because of the base, current iC is slightly smaller than iE.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

The $x-t$ graph of a particle moving along a straight line is shown in figure The speed-time graph of the particle is correctly shown by
A hollow spherical shell at outer radius $R$ floats just submerged under the water surface. The inner radius of the shell is $r$. If the specific gravity of the shell material is $\frac{27}{8}$ $w.r.t.$ water, the value of $r$ is$......R$
What is the pressure in $atm$ on a swimmer $10\; m$ below the surface of a lake?
If the excess pressure inside a soap bubble is balanced by oil column of height $2\; mm$, then the surface tension of soap solution will be ($r = 1 \,cm$ and density $d = 0.8\, gm/cc$)
A force defined by $F=\alpha t^2+\beta t$ acts on a particle at a given time $t$. The factor which is dimensionless, if $\alpha$ and $\beta$ are constants, is:
Two bodies of masses m and 4m are moving with equal linear momentum. The ratio of their kinetic energies is:
To construct a barometer, a tube of length 1m is filled completely with mercury and is inverted in a mercury cup. The barometer reading on a particular day is 76cm. Suppose a 1m tube is filled with mercury up to 76cm and then closed by a cork. It is inverted in a mercury cup and the cork is removed. The height of mercury column in the tube over the surface in the cup will be.
  1. zero.
  2. 76cm.
  3. > 76cm.
  4. < 76cm.
Equal masses of three liquids $A, B$ and $C$ have temperatures $10\,^oC$, $25\,^oC$ and $40\,^oC$ respectively. If $A$ and $B$ are mixed, the mixture has a temperature of $15\,^oC$. If $B$ and $C$ are mixed then mixture has temperature of $30\,^oC$. If $A$ and $C$ are mixed, the mixture will have a temperature of ........ $^oC$
A ball rolls off the top of a stairway with horizontal velocity $\mathrm{u}$. The steps are $0.1 \mathrm{~m}$ high and $0.1 \mathrm{~m}$ wide. The minimum velocity $\mathrm{u}$ with which that ball just hits the step $5$ of the stairway will be $\sqrt{\mathrm{x}} \mathrm{ms}^{-1}$ where $\mathrm{x}=$___________ [use $\mathrm{g}=10 \mathrm{~m} / \mathrm{s}^2$ ].
The following bodies are made to roll up (without slipping) the same inclined plane from a horizontal place: $(i)$ a ring of radius $R,\,(ii)$ a solid cylinder of radius $\frac {R}{2}$  nd $(iii)$ a solid sphere of radius $\frac {R}{4}.$ If, in each case, the speed of the center of mass at bottom of the incline is same, the ratio of the maximum heights they climb is