Question
Mass energy equation was propounded by:
✓
Answer
- Einstein.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
In a plane electromagnetic wave the phase difference between electric and magnetic field vectors is :
Three resistors each of 4Ω are connected together to form a network. The equivalent resistance of the network cannot be(a) 1.33 Ω(b) 3.0 Ω(c) 6.0 Ω(d) 12.0 Ω
An AND gate can be prepared by repetitive use of:
- NOT gate.
- OR gate.
- NAND gate.
- NOR gate.
Two circular loops of equal radii are placed coaxially at some separation. The first is cut and a battery is inserted in between to drive a current in it. The current c~anges slightly because of the variation in resistance with temperature. During this period, the two loops:
- Attract each other.
- Repel each other.
- Do not exert any force on each other.
- Attract or repel each other depending on the sense of the current.
A wire of diameter $0.02$ metre contains $10^{28}$ free electrons per cubic metre. For an electrical current of $100 A ,$ the drift velocity of the free electrons in the wire is nearly
→The amount of work done by the cell on a unit positive charge carrier to force it to go to the point of higher potential is called:
A galvanometer can be converted into an ammeter by connecting(a) Low resistance in series(b) High resistance in parallel(c) Low resistance in parallel(d) High resistance in series
Total internal reflection of a ray of light is possible when the ($1_{c}$= critical angle, i= angle of incidence)
→Assertion : For the scattering of $\alpha-$particles at a large angles, only the nucleus of the atom is responsible.
Reason : Nucleus is very heavy in comparison to electrons.
→Reason : Nucleus is very heavy in comparison to electrons.
A rectangular loop with a sliding connector of length $l = 1.0 m$ is situated in a uniform magnetic field $B = 2T$ perpendicular to the plane of loop. Resistance of connector is $r = 2W.$ Two resistance of $6W$ and $3W$ are connected as shown in figure. The external force required to keep the connector moving with a constant velocity $v = 2\ m/s$ is
→