MCQ
Name the unit in which work function of a metal is generally expressed.
- ANewton
- BKilojoule
- ✓$eV$
- D$V$
✓
Answer
Correct option: C.
$eV$
Work function in generally expressed in electron volt.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Select the correct statement
A long straight wire of circular cross section of radius'a carries a steady current $1$. The current is uniformly distributed across its cross section. The ratio of magnitudes of the magnetic field at a point $a/2$ above the surface of wire to that of a point a $2$ below its surface is
→Light takes $8$ min $ 20\, sec$ to reach from sun on the earth. If the whole atmosphere is filled with water, the light will take the time ($_a{\mu _w} = 4/3$)
→A coil of self inductance $L$ is connected at one end of two rails as shown in figure. A connector of length $l,$ mass $m$ can slide freely over the two parallel rails . The entire set up is placed in a magnetic field of induction $B$ going into the page. At an instant $t= 0$ an initial velocity $v_0$ is imparted to it and as a result of that it starts moving along $x-$ axis. The displacement of the connector is represented by the figure
→If the apertature of a telescope is decreased the resolving power will:
Figure represents two simple harmonic motions. The parameter which has different values in the two motions is:
AB and CD are long straight conductor, distance d apart, carrying a current I. The magnetic field at the midpoint of BC is
Given $L_1 = 1\, mH, R_1 = 1\,\Omega , L_2 = 2\,mH, R_2 = 2\,\Omega $ Neglecting mutual inductance the time constants (in $ms$) for circuit.....$ms$
→In an inductor of inductance L = 100 mH, a current of I = 10A is flowing. The energy stored in the inductor is
In a $PN$ junction:
→