MCQ
Potentiometer measures potential more accurately because:
- ✓It measures potential in open circuit.
- BIt uses sensitive galvanometer for null deflection.
- CIt uses high resistance potentiometer wire.
- DIt measures potential in closed circuit.
✓
Answer
Correct option: A.
It measures potential in open circuit.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
If a ${H_2}$ nucleus is completely converted into energy, the energy produced will be around..........$MeV$
→$A$ power transmission line feeds input power at $2$.$3$ $\mathrm{kV}$ to a step down transformer with its primary winding having $3000$ turns. The output power is delivered at $230 \mathrm{~V}$ by the transformer. The current in the primary of the transformer is $5 \mathrm{~A}$ and its efficiency is $90 \%$. The winding of transformer is made of copper. The output current of transformer is____ $A.$
→At a place the earth's horizontal component of magnetic field is $0.36\times 10^{-4}$ weber/m$^2$. If the angle of dip at that place is 60$^\circ$, then the vertical component of earth's field at that place in weber/m$^2$ will be approximately
→A cube of a metal is given a positive charge Question: For this system, which of the following statements is true?
The phase difference between incident wave and reflected wave is $180^o $ when light ray
→In the CB mode of a transistor, when the collector voltage is changed by 0.5 volt. The collector current changes by 0.05 mA. The output resistance will be
Four light waves are represented by
→(i) $y = a_1\, sin\omega\, t$
(ii) $y = {a_2}\sin (\omega \,t + \phi )$
(iii) $y = {a_1}\sin 2\omega \,t$
(iv) $y = {a_2}\sin 2(\,\omega \,t + \phi )$
Interference fringes may be observed due to superposition of
In $AM$ , the centpercent modulation is achieved when
→The voltage gain of the following amplifier is
A zener diode in the circuit shown has a knee current of $5\,mA$ and a maximum allowed power dissipation of $300\,mW$ . What are the minimum and maximum load currents that can be drawn safely from the circuit, keeping the output voltage $V_0$ constant at $6\,volts$ ?
→