MCQ
Radioactivity is
  • A
    Irreversible process
  • B
    Self disintegration process
  • C
    Spontaneous process
  • All of the above

Answer

Correct option: D.
All of the above
All of the above

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

The reason for the energy associated with a moving charge is:
A capacitor of capacity $C$ is charged to a steady potential difference $V$ and connected in series with an open key and a pure resistor $'R'$. At time $t = 0$, the key is closed. If $I =$ current at time $t$, a plot of log $I$ against $'t'$ is as shown in $(1)$ in the graph. Later one of the parameters i.e. $V, R$ or $C$ is changed keeping the other two constant, and the graph $(2)$ is recorded. Then
The de Broglie wavelength of an electron moving with a velocity $1.5 \times 10^8\, m/s$ is equal to that of a photon. The ratio of the kinetic enrgy of the electron to the energy of the photon is
Find the equivalent capacitance of the circuit between point $A$ and $B$.
An $\alpha$ particle is accelerated through a p.d of ${10^6}$ volt then $ K.E$ . of particle will be .......... $MeV$
For a common base configuration of PNP transistor $\frac{1_{ C }}{1_{ E }}=0.98$ then maximum current gain in common emitter configuration will be
A long straight wire is parallel to one edge as in fig. If the current in the long wire is varies in time as $I = I_0e^{-t/\tau}$, what will be the induced $emf $ in the loop?
Gauss’s law is true for.
Seawater at a frequency $f =9 \times 10^{2} \,Hz ,$ has permittivity $\varepsilon=80\, \varepsilon_{0}$ and resistivity $\rho=0.25\, \Omega m.$ Imagine a parallel plate capacitor is immersed in seawater and is driven by an alternating voltage source $V ( t )= V _{0} \sin (2 \pi ft ) .$ Then the conduction current density becomes $10^{x}$ times the displacement current density after time $t =\frac{1}{800} \,s$. The value of $x$ is ......... .
$\left(\frac{1}{4 \pi \varepsilon_{0}}=9 \times 10^{9} Nm ^{2} C ^{-2}\right)$
A modulating signal $2 \sin \left(6.28 \times 10^{6}\right) t$ is added to the carrier signal $4 \sin \left(12.56 \times 10^{9}\right)$ t for amplitude modulation. The combined signal is passed through a non-linear square law device. The output is then passed through a band pass filter. The bandwidth of the output signal of band pass filter will be $MHz$.