Question
State factors on which coefficient of mutualinductance between two coils depend.
✓
Answer
Factors on which coefficient of mutual inductance of coils depend are :
(i) Size, shape, number of turns, cross-section of coils etc.
(ii) Distance between two coils.
(iii) Relative directions of two coils.
(iv) Substances of cores of two coils.
(i) Size, shape, number of turns, cross-section of coils etc.
(ii) Distance between two coils.
(iii) Relative directions of two coils.
(iv) Substances of cores of two coils.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
In RL and RC series AC circuits the resonance phenomenon isn't possible. Why?
Identify the logic gates marked 'P' and 'Q' in the given circuit. Write the truth table for the combination.
A water pump lifts water from a level 10m below the ground. Water is pumped at a rate of 30kg/ minute with negligible velocity. Calculate the minimum horsepower the engine should have to do this.
Prove that $\varepsilon_0 \mu_0=\frac{1}{c^2}\left(\right.$ or $\left.c=\frac{1}{\sqrt{\varepsilon_0 \mu_0}}\right)$. ###
Derive the relation between the permittivity of free space $\left(\varepsilon_0\right)$, the permeability of free space $\left(\mu_0\right)$ and the speed of light $(c)$.
→Derive the relation between the permittivity of free space $\left(\varepsilon_0\right)$, the permeability of free space $\left(\mu_0\right)$ and the speed of light $(c)$.
Answer the following question:
When viewing through a compound microscope, our eyes should be positioned not on the eyepiece but a short distance away from it for best viewing. Why? How much should be that short distance between the eye and eyepiece?
When viewing through a compound microscope, our eyes should be positioned not on the eyepiece but a short distance away from it for best viewing. Why? How much should be that short distance between the eye and eyepiece?
Two bulbs are rated (P1, V) and (P2, V). If they are connected in series in parallel across a supply V.
Find the power dissipated in the two combinations in terms of P1 and P2.
Find the power dissipated in the two combinations in terms of P1 and P2.
List all the forces acting on:
- The pulley A.
- The boy and.
- The block C in figure.
Give some commonly known ideas regarding magnetism.
The average speed of a snail is 0.020 miles/hour and that of a leopard is 70 miles/hour. Convert these speeds in SI units.
An inductor is connected to a battery through a switch. Explain why the emf induced in the inductor is much larger when the switch is opened as compared to the emf induced when the switch is closed.