Question
Suppose potential energy between electron and proton at separation r is given by U = K ln (r), where K is a constant. For such a hypothetical hydrogen atom, the ratio of energy difference between energy levels (n = 1 and n = 2) and (n = 2 and n = 4) is?

Answer

  1. 1.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Correct exposure for a photographic print is 10 seconds at a distance of one metre from a point source of 20 candela. For an equal fogging of the print placed at a distance of 2 m from a 16 candela source, the necessary time for exposure is(a) 100 sec(b) 25 sec(c) 50 sec   (d) 75 sec
       
The angular dispersion produced by a prism:
The shortest wavelength in Balmer’s series for Hydrogen atom is ...A... and this is obtained by substituting ...B ... in Balmer’s formula. Here, A and B refer to?
If a magnet is plugged into a coil, then the magnitude of induced emf does not depend upon:
The energy of hydrogen atom in its ground state is – 13.6 eV. The energy of the level corresponding  to the quantum number n is equal 5 is(a) – 5.40 eV(b) – 2.72 eV(c) – 0.85 eV(d) – 0.54 eV
       
Which one is correct relation for thermionic emission
The force between two charges 0.06 m apart is 5 N. If each charge is moved towards the other by 0.01 m, then the force between them will become(a) 7.20 N(b) 11.25 N(c) 22.50 N(d) 45.00 N
       
In a p-n junction:
  1. New holes and conduction electrons are produced continuously throughout the material.
  2. New holes and conduction electrons are produced continuously throughout the material except in the depletion region.
  3. Holes and conduction electrons recombine continuously throughout the material.
  4. Holes and conduction electrons recombine continuously throughout the material except in the depletion region.
The refractive index of water is $1.33.$ What will be the speed of light in water
When an impurity is doped into an intrinsic semiconductor, the conductivity of the semiconductor:
  1. Increases.
  2. Decreases.
  3. Remains the same.
  4. Becomes zero.