MCQ
The coefficient of thermal conductivity depends upon
- ATemperature difference of two surfaces
- BArea of the plate
- CThickness of the plate
- ✓Material of the plate
✓
Answer
Correct option: D.
Material of the plate
(d) It is the property of material.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
The coil in a moving coil galvanometer experiences torque proportional to current passes through it. If a steady current $i$ is passed through it the steady deflection of the coil is found to be $90^o$ . Now the steady current is switched off and a charge $q$ is suddenly passed through coil. If the coil has $N$ turns of area $A$ and its moment of inertia is $I$ about the axis it is going to rotate then the maximum angle through which it deflects upon passing charge $q$ is
→An equiconvex lens of glass of focal length $0.1$ metre is cut along a plane perpendicular to principle axis into two equal parts. The ratio of focal length of new lenses formed is
→Can two isothermal curves cut each other
The surface tension of soap solution is $25 \times 10^{-3} \mathrm{Nm}^{-1}$. The excess pressure inside a soap bubble of diameter $1 \mathrm{~cm}$ is
→Two short magnets with their axes horizontal and perpendicular to the magnetic meridian are placed with their centres $40 \mathrm{~cm}$ east and $50 \mathrm{~cm}$ west of magnetic needle. If the needle remains undeflected, the ratio of their magnetic moments $M_1: M_2$ is
→An aluminum rod (Young's modulus $=7 \times 10^9 N / m ^2$ ) has a breaking strain of $0.2 \%$. The minimum cross-sectional area of the rod in order to support a load of $10^4$ Newton's is
→The vectors from origin to the points $A$ and $B$ are $\vec{A}=3 \hat{i}-6 \hat{j}+2 \hat{k}$ and $\vec{B}=2 \hat{i}+\hat{j}-2 \hat{k}$ respectively. The area of the triangle $O A B$ be
→The resolving power of a telescope depends on
A conducting wire is moving towards right in a magnetic field $B$. The direction of induced current in the wire is shown in the figure. The direction of magnetic field will be
→In Jager's method, at the time of bursting of the bubble