Question
The coercive force for a certain permanent magnet is $4.0 × 10^4A/m$. Thia magnet is placed inside a long solenoid of 40 turns/cm and a current is passed in the solenoid to demagnetise it completely. Find the current.
✓
Answer
$\text{B}=\mu_0\text{ni},\ \text{H}=\frac{\text{B}}{\mu_0}$
Given n = 40 turns/cm = 4000 turns/m
$⇒ H = ni$
$H = 4 × 10^4A/m$
$\Rightarrow\text{i}=\frac{\text{H}}{\text{n}}=\frac{4\times10^4}{4000}=10\text{A}.$
Given n = 40 turns/cm = 4000 turns/m
$⇒ H = ni$
$H = 4 × 10^4A/m$
$\Rightarrow\text{i}=\frac{\text{H}}{\text{n}}=\frac{4\times10^4}{4000}=10\text{A}.$
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Which of the following has the least wavelength? Gamma rays, blue light, infrared radiation and ultraviolet radiation.
What is the power factor of pure inductor or capacitor?
What is the importance of nuclear binding energy?
On what factors is induced current in a coil depends?
Sometimes it is said that "heat is developed" in a resistance when there is an electric current in it. Recall that heat is defined as the energy being transferred due to temperature difference. Is the statement in quotes technically correct?
The instantaneous current and voltage of an a.c. circuit are given by
i = 10 sin 300t A and v = 200 sin 300t V
What is the power dissipation in the circuit?
i = 10 sin 300t A and v = 200 sin 300t V
What is the power dissipation in the circuit?
Figure shows a small diffused plane source S placed over a horizontal table-top at a distance of 2.4m with its plane parallel to the table-top. The illuminance at the point A directly below the source is 25 lux. Find the illuminance at a point B of the table at a distance of 1.8m from A.
A bar magnet has magnetic moment M. It is divided into n- equal parts. Will each part be a magnetic dipole? What will be the magnetic moment of each part?
Consider the situation of the previous problem. If the mirror reflects only 64% of the light energy falling on it, what will be the ratio of the maximum to the minimum intensity in the interference pattern observed on the screen?
If peak value of alternating current is Io, then what is the magnitude of (a) rms value of current and (b) average value of current?