Question
The electric potential inside a conducting sphere:
✓
Answer
- Remains constant from centre to surface.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Maxwell’s equations describe the fundamental laws of(a) Electricity only(b) Magnetism only(c) Mechanics only(d) Both (a) and (b)
Which of the following graphs shows the variation of electric field $E$ due to a hollow spherical conductor of radius $R$ as a function of distance from the centre of the sphere
→An e.m.f. of 12 volt is produced in a coil when the current in it changes at the rate of 45 amp/minute. The inductance of the coil is(a) 0.25 henry(b) 1.5 henry(c) 9.6 henry(d) 16.0 henry
A point source of light $B$ is placed at a distance $L$ in front of the centre of a mirror of width $d$ hung vertically on a wall. $A$ man walks in front of the mirror along a line parallel to the mirror at a distance $2L$ from it as shown. The greatest distance over which he can see the image of the light source in the mirror is
→The ratio of longest wavelength and the shortest wavelength observed in the five spectral series of emission spectrum of hydrogen is
A 100 mH coil carries a current of 1 ampere. Energy stored in its magnetic field is(a) 0.5 J(b) 1 J(c) 0.05 J (d) 0.1 J
The capacity of a parallel plate condenser is 10 μF, when the distance between its plates is 8 cm. If the distance between the plates is reduced to 4 cm, then the capacity of this parallel plate condenser will be(a) 5 μF (b) 10 μF(c) 20 μF(d) 40 μF
The electric field intensity E, current density J and specific resistance k are related to each other through the relation:
Assertion : Photosensitivity of a metal is high if its work function is small.
Reason : Work function $=\mathrm{hf}_0$ where $\mathrm{f}_0$ is the threshold frequency.
→Reason : Work function $=\mathrm{hf}_0$ where $\mathrm{f}_0$ is the threshold frequency.
A step-up transformer has transformation ratio of 3 : 2. What is the voltage in secondary if voltage in primary is 30 V (a) 45 V(b) 15 V(c) 90 V(d) 300 V