MCQ
The example for non-ohmic resistance is
- ACopper wire
- BCarbon resistance
- ✓Diode
- DTungston wire
✓
Answer
Correct option: C.
Diode
c
(c) Because $V-i$ graph of diode is non-linear.
(c) Because $V-i$ graph of diode is non-linear.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
An ammeter reads upto 1 ampere. Its internal resistance is 0.81 ohm. To increase the range to 10 A the value of the required shunt is
An alpha particle is accelerated through a potential difference of $10^6$ valt. Its kinetic energy will be
→An empty thick conducting shell of inner radius $a$ and outer radius $b$ is shown in figure.If it is observed that the inner face of the shell carries a uniform charge density $-\sigma$ and the surface carries a uniform charge density $ '\sigma '$
→If the outer surface of the shell is earthed, then identify the correct statement(s)
In one second, a current of $10$ A changes through a coil. The induced emf is $10V$, then, self-inductance of the coil is
→For a given triode $\mu = 20$. The load resistance is $1.5$ times the anode resistance. The maximum gain will be
→An infinitely long hollow conducting cylinder with inner radius $R / 2$ and outer radius $R$ carries a uniform current density along is length. The magnitude of the magnetic field, $|\vec{B}|$ as a function of the radial distance $r$ from the axis is best represented by:
→Some electric bulbs are connected in series across a 220 V supply in a room. If one bulb is fused then remaining bulbs are connected again in series across the same supply. The illumination in the room will
The radius of curvature of convex surface of a thin plano-convex lens is $15 cm$ and refractive index of its material is $1.6.$ The power of the lens will be
→The total capacity of the system of capacitors shown in the adjoining figure between the points A and B is
Which logic gate is represented by the following combination of logic gates
