MCQ
The figure shows three capacitors $C_1 C_2$ and $C_3$. The dashed lines are equipotential surfaces within each capacitor. In which of the capacitors is the po. between the two equipotentials $\Delta V =50 V$ ?

Image

  • A
    Only in $C_1$
  • B
    Only in $C _1$ and $C _2$
  • C
    Only in $C _3$
  • In all three capacitors

Answer

Correct option: D.
In all three capacitors
In all three capacitors

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Two coils $A$ and $B$ have mutual inductance $0.008 H$. The current changes in the coil $A$, according to the equation $I=I_m \sin \omega t_{\text {, }}$ where $I_m=5 A$ and $0=200 \pi rad s ^{-1}$. The maximum value of the e.m.f. induced in the coil $B$ in volt is
The dimensional formula of surface tension is ______.
Let $n_1$ and $n_2$ be two slightly different frequencies of sound waves. The time interval between a waxing and the immediate next waning is
Two strings $A$ and $B$ of same material are stretched by same tension. The radius of the string $A$ is double the radius of string $B$. Transverse wave travels on string $A$ with speed $V_A$ and on string $B$ with speed $V_B$. The ratio $\frac{V_A}{V_B}$ is
Two steel marbles (of radii $\mathrm{R}$ and $\frac{R}{3}$ ) are released in a highly viscous liquid. The ratio of the terminal velocity of the larger marble to that of the smaller is
Water rises in a capillary tube of radius ' $r$ ' upto a height ' $h$ '. The mass of water in capillary is ' $m$ '. The mass of water that will rise in a capillary tube of radius $r / 3$ will be
In a transistor, in common emitter configuration, the ratio of power gain to voltage gain is
A current through a coil of self inductance 10 mH increases from 0 to 1 A in 0.1 s. What is the induced emf in the coil?
A solid cylinder has mass ' $M$ ', radius ' $R$ ' and length ' $I$ '. Its moment of inertia about an axis passing through its centre and perpendicular to its own axis is
A solenoid of length $0.4 m$ and having $500$ turns of wire carries a current $3 A$. A thin coil having $10$ turns of wire and radius $0.1 m$ carries current $0.4 A$. The torque required to hold the coil in the middle of the solenoid with its axis perpendicular to the axis of the solenoid is $( \mu_0=4 \pi \times 10^{-7} SI$ units, $\left.\pi^2=10\right)\left(\sin 90^{\circ}=1\right)$