MCQ
The heat engine with maximum efficiency is:
- Adiesel engine
- Bsteam engine
- Cauto engine
- ✓Carnot engine
✓
Answer
Correct option: D.
Carnot engine
D
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
In the 5th overtone of an open organ pipe, these are $(N-$ stands for nodes and $A-$ for antinodes)
→Candela is the unit of
Using dimensional analysis, the resistivity in terms of fundamental constants $h, m_{e}, c, e, \varepsilon_{0}$ can be expressed as
→Time period of a simple pendulum in a stationary lift is ' $T$ '. If the lift accelerates with $\frac{ g }{6}$ vertically upwards then the time period will be .....
→(where $g =$ acceleration due to gravity)
The specific heat of a metal at low temperatures varies according to $S = aT^3$ where a is a constant and $T$ is the absolute temperature. The heat energy needed to raise unit mass of the metal from $T = 1 K$ to $T = 2 K$ is
→The time period T of a small drop of liquid (due to surface tension) depends on density $\rho$, radius r and surface tension S. The relation is:
→If a force of $250\, N$ act on body, the momentum acquired is $125\, kg-m/s$. What is the period for which force acts on the body ......... $\sec$
→A body is pulled along a rough horizontal surface with a velocity $6\,m/s$. If the body comes to rest after travelling $9\,m$ , then coefficient of sliding friction, is- (Take $g = 10\,m/s^2$ )
→A diatomic ideal gas is used in a Carnot engine as the working substance. If during the adiabatic expansion part of the cycle the volume of the gas increases from $V$ to $32\ V$, the efficiency of the engine is
→If two glass plates have water between them and are separated by very small distance ( see figure), it is very difficult to pull them apart. It is because the water in between forms cylindrical surface on the side that gives rise to lower pressure in the water in comparison to atmosphere. If the radius of the cylindrical surface is $R$ and surface tension of water is $T$ then the pressure in water between the plates is lower by
→