The least count of the main scale of a vernier callipers is $1\, mm$. Its vernier scale is divided into $10$ divisions and coincide with $9$ divisions of the main scale. When jaws are touching each other, the $7$ th division of vernier scale coincides with a division of main scale and the zero of vernier scale is lying right side of the zero of main scale. When this vernier is used to measure length of a cylinder the zero of the vernier scale between $3.1\, cm$ and $3.2\, cm$ and $4^{th}$ $VSD$ coincides with a main scale division.The length of the cylinder is $.....cm$

($VSD$ is vernier scale division)

  • A$3.21$
  • B$2.99$
  • C$3.2$
  • D$3.07$
JEE MAIN 2020, Medium
art

Download our app
and get started for free

Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*

Similar Questions

  • 1
    Pressure exerted by a gas is found to be $50\, N/m^2$ , then the value of pressure in $CGS$ system is
    View Solution
  • 2
    One main scale division of a vernier caliper is equal to $m$ units. If $n^{\text {th }}$ division of main scale coincides with $(n+1)^{\mathrm{ht}}$ division of vernier scale, the least count of the vernier caliper is:
    View Solution
  • 3
    The $SI$ unit of magnetic permeability is
    View Solution
  • 4
    The temperature of a metal coin is increased by $100^{\circ} C$ and its diameter increases by $0.15 \%$. Its area increases by nearly
    View Solution
  • 5
    In terms of resistance $R$ and time $T$, the dimensions of ratio $\frac{\mu } {\varepsilon }$ of the permeability $\mu $ and permittivity $\varepsilon $  is
    View Solution
  • 6
    If the value of resistance is $10.845 \,ohm$ and the value of current is $3.23 \,amp$, the value of potential with significant numbers would be ........... $volt$
    View Solution
  • 7
    Which is dimensionless
    View Solution
  • 8
    The dimensions $\left[ MLT ^{-2} A ^{-2}\right]$ belong to the :
    View Solution
  • 9
    If the measurement errors in all the independent quantities are known, then it is possible to determine the error in any dependent quantity. This is done by the use of series expansion and truncating the expansion at the first power of the error. For example, consider the relation $z=x / y$. If the errors in $x, y$ and $z$ are $\Delta x, \Delta y$ and $\Delta z$, respectively, then

    $\mathrm{z} \pm \Delta \mathrm{z}=\frac{\mathrm{x} \pm \Delta \mathrm{x}}{\mathrm{y} \pm \Delta \mathrm{y}}=\frac{\mathrm{x}}{\mathrm{y}}\left(1 \pm \frac{\Delta \mathrm{x}}{\mathrm{x}}\right)\left(1 \pm \frac{\Delta \mathrm{y}}{\mathrm{y}}\right)^{-1} .$

    The series expansion for $\left(1 \pm \frac{\Delta y}{y}\right)^{-1}$, to first power in $\Delta y / y$, is $1 \mp(\Delta y / y)$. The relative errors in independent variables are always added. So the error in $\mathrm{z}$ will be $\Delta \mathrm{z}=\mathrm{z}\left(\frac{\Delta \mathrm{x}}{\mathrm{x}}+\frac{\Delta \mathrm{y}}{\mathrm{y}}\right)$.

    The above derivation makes the assumption that $\Delta x / x<<1, \Delta \mathrm{y} / \mathrm{y} \ll<1$. Therefore, the higher powers of these quantities are neglected.

    ($1$) Consider the ratio $\mathrm{r}=\frac{(1-\mathrm{a})}{(1+\mathrm{a})}$ to be determined by measuring a dimensionless quantity a.

    If the error in the measurement of $\mathrm{a}$ is $\Delta \mathrm{a}(\Delta \mathrm{a} / \mathrm{a} \ll<1)$, then what is the error $\Delta \mathrm{r}$ in

    $(A)$ $\frac{\Delta \mathrm{a}}{(1+\mathrm{a})^2}$ $(B)$ $\frac{2 \Delta \mathrm{a}}{(1+\mathrm{a})^2}$ $(C)$ $\frac{2 \Delta \mathrm{a}}{\left(1-\mathrm{a}^2\right)}$ $(D)$ $\frac{2 \mathrm{a} \Delta \mathrm{a}}{\left(1-\mathrm{a}^2\right)}$

    ($2$) In an experiment the initial number of radioactive nuclei is $3000$ . It is found that $1000 \pm$ $40$ nuclei decayed in the first $1.0 \mathrm{~s}$. For $|\mathrm{x}| \ll 1$, In $(1+\mathrm{x})=\mathrm{x}$ up to first power in $x$. The error $\Delta \lambda$, in the determination of the decay constant $\lambda$, in $\mathrm{s}^{-1}$, is

    $(A) 0.04$    $(B) 0.03$    $(C) 0.02$   $(D) 0.01$

    Give the answer quetion ($1$) and ($2$)

    View Solution
  • 10
    Which of the following is not the unit of energy
    View Solution