The materials suitable for making electromagnets should have - Vidyadip

Question

The materials suitable for making electromagnets should have

✓

Answer

Electro magnet should be amenable to magnetisation and demagnetization Retenivity should be low and coercivity should be low

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Explore more

NEET STD 11 Science question papers→Gujarat Board STD 11 Science question papers→Gujarat Board question paper generator→

Similar questions

One mole of an ideal monoatomic gas is compressed isothermally in a rigid vessel to double its pressure at room temperature, $27\,^oC$.The work done on the gas will be

In order to determine the Young's Modulus of a wire of radius $0.2\, cm$ (measured using a scale of least count $=0.001\, cm )$ and length $1 \,m$ (measured using a scale of least count $=1\, mm$ ), a weight of mass $1\, kg$ (measured using a scale of least count $=1 \,g$ ) was hanged to get the elongation of $0.5\, cm$ (measured using a scale of least count $0.001\, cm$ ). What will be the fractional error in the value of Young's Modulus determined by this experiment? (in $\%$)

A hollow cylindrical conductor has length of $3.14\,m$, while its inner and outer diameters are $4\,mm$ and $8\,mm$ respectively. The resistance of the conductor is $n \times 10^{-3}\,\Omega$.If the resistivity of the material is $2.4 \times 10^{-8}\,\Omega\,m$. The value of $n$ is $..........$

A thermally insulted vessel contains $150\, g$ of water at $0\,^oC$. Then the air from the vessel is pumped out a adiabatically. A fraction of water turns into ice and the rest evaporates at $0\,^oC$ itself. The mass of evaporated water will be closes to ....... $g$ (Latent heat of vaporization of water $= 2.10 \times10^6\, Jkg^{-1}$ and Laten heat of Fusion of water $ = 3.36 \times10^5\,Jkg^{-1}$ )

For the four sets of three measured physical quantities as given below. Which of the following options is correct ?

$(i)$ $\mathrm{A}_{1}=24.36, \mathrm{B}_{1}=0.0724, \mathrm{C}_{1}=256.2$

$(ii)$ $\mathrm{A}_{2}=24.44, \mathrm{B}_{2}=16.082, \mathrm{C}_{2}=240.2$

$(iii)$ $\mathrm{A}_{3}=25.2, \mathrm{B}_{3}=19.2812, \mathrm{C}_{3}=236.183$

$(iv)$ $\mathrm{A}_{4}=25, \mathrm{B}_{4}=236.191, \mathrm{C}_{4}=19.5$

The engine of a motorcycle can produce a maximum acceleration $5 \,ms^{-2}$. Its brakes can produce a maximum retardation $10\, ms^{-2}$. What is the minimum time in which it can cover a distance of $1.5\, km$.........$sec$

What is the ratio of specific heats of constant pressure and constant volume for $N{H_3}$

The energy associated with electric field is $(U_E)$ and with magnetic field is $(U_B)$ for an electromagnetic wave in free space. Then

Ratio of magnetic intensities for an axial point and a point on broad side-on position at equal distance d from the centre of magnet will be or The magnetic field at a distance d from a short bar magnet in longitudinal and transverse positions are in the ratio

A mass $m$ attached to free end of a spring executes SHM with a period of $1\; s$. If the mass is increased by $3\; kg$ the period of oscillation increases by one second, the value of mass $m$ is $..............kg$.