MCQ
The potential to which a conductor is raised, depends on
- AThe amount of charge
- BGeometry and size of the conductor
- ✓Both $(a)$ and $(b)$
- DOnly on $(a)$
✓
Answer
Correct option: C.
Both $(a)$ and $(b)$
c
(c) $V = Q/C$
$Q$ $=$ the amount of charge
$C$ $=$ capacitance which depends on geometry and size of conductor.
(c) $V = Q/C$
$Q$ $=$ the amount of charge
$C$ $=$ capacitance which depends on geometry and size of conductor.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
The kinetic energy of an electron, $\alpha$-particle and a proton are given as $4K,2K$ and $K$ respectively. The de-Broglie wavelength associated with electron ( $\lambda e), \alpha$-particle $(\lambda \alpha)$ and the proton $(\lambda p)$ are as follows:
→The two slits at a distance of $1\, mm $ are illuminated by the light of wavelength $6.5 \times {10^{ - 7}}m$. The interference fringes are observed on a screen placed at a distance of $1m. $ The distance between third dark fringe and fifth bright fringe will be......$mm$
→In a series $R L C$ circuit, potential differences across $R, L$ and $C$ are $30 \,V , 60 \,V$ and $100 \,V$ respectively as shown in figure. The $e.m.f.$ of source (in volts) is .........
→$A$ certain prism is found to produce a minimum deviation of $38^o$. It produces a deviation of $44^o$ when the angle of incidence is either $42^o$ or $62^o$. What is the angle of incidencewhen it is undergoing minimum deviation?......$^o$
→If a dielectric introduced between the plates of a parallel plate condenser, then which of the following is possible:
A sonometer wire supports a $4\ kg$ load and vibrates in fundamental mode with a tuning fork of frequency $416\ Hz$. The length of the wire between the bridges is now doubled. In order to maintain fundamental mode, the load should be changed to:
→A solid reflects incident light and it’s electrical conductivity decreases with temperature. The binding in this solids
In the $YDSE$ shown the two slits are covered with thin sheets having thickness $t$ & $2t$ and refractive index $2\mu$ and $\mu$ . Find the position $(y)$ of central maxima
→An $N-P-N$ transistor in a common emitter mode is used as a simple voltage amplifier with a collector current of $4\ mA$ . The terminal of a $8\ V$ battery is connected to the collector through a load resistance $R_L$ and to the base through a resistance $R_B$ .The collector-emitter voltage $V_{CE} = 4\ V$ , base-emitter voltage $V_{BE} = 0.6\ V$ and base current amplification factor ${\beta _{d.c.}} = 100$ . Calculate the values of $R_L$ and $R_B$
→A coil has 1,000 turns and 500 cm$^2$ as its area. The plane of the coil is placed at right angles to a magnetic induction field of $2 \times 10^{-5} \mathrm{wb} / \mathrm{m}^2$. The coil is rotated through 180° in 0.2 seconds. The average e.m.f. induced in the coil, in milli-volts, is
→