MCQ
The property of surface tension is obtained in
- ASolids, liquids and gases
- ✓Liquids
- CGases
- DMatter
✓
Answer
Correct option: B.
Liquids
b
The property of surface tension is obtained in Liquids.
The property of surface tension is obtained in Liquids.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A particle moves in a plane with constant acceleration in a direction different from the initial velocity. The path of the particle will be
The motion of satellites and planets is:
To mop-clean a floor, a cleaning machine presses a circular mop of radius $R$ vertically down with a total force $F$ and rotates it with a constant angular speed about its axis. If the force $F$ is distributed uniformly over the mop and the floor is $\mu $, the torque, applied by the machine on the mop is
→A projectile is fired with velocity $u$ at an angle $\theta$ with horizontal. At the highest point of its trajectory it splits up into three segments of masses $m, m$ and $2 \,m$. First part falls vertically downward with zero initial velocity and second part returns via same path to the point of projection. The velocity of third part of mass $2 \,m$ just after explosion will be
→On decreasing the temperature, surface tension:
A cylinder fitted with a piston contains $0.2 \,moles$ of air at temperature $27°C.$ The piston is pushed so slowly that the air within the cylinder remains in thermal equilibrium with the surroundings. Find the approximate work done by the system if the final volume is twice the initial volume ...... $J$
→What is the shape when a non-wetting liquid is placed in a capillary tube
A charged particle moves in a gravity$-$free space without change in velocity. Which of the following is are possible:
→- $\text{E}=0,\ \text{B}=0$
- $\text{E}=0,\ \text{B}\not=0$
- $\text{E}\not=0,\ \text{B}=0$
- $\text{E}\not=0,\ \text{B}\not=0$
A circular metallic disc of radius $R$ has a small circular cavity of radius $r$ as shown in figure. On heating the system
→The force required to punch a square hole $2\,cm$ side in steel sheet $2\,mm$ thick is (shearing stress of steel sheet $= 3.5\times 10^8\,\,N/m^2$ )
→