MCQ
The unit of surface tension in $Sl$ system is
- ADyne $/ cm ^2$
- ✓Newton / m
- CDyne / cm
- DNewton $/ m^2$
✓
Answer
Correct option: B.
Newton / m
(b) Surface tension $=\frac{\text { Force }}{\text { Length }}=$ Newtons $/$ metre
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Two magnets of equal mass are joined at right angles to each other as shown the magnet $1$ has a magnetic moment $3$ times that of magnet $2.$ This arrangement is pivoted so that it is free to rotate in the horizontal plane. In equilibrium what angle will the magnet $1$ subtend with the magnetic meridian
→Two bodies $M$ and $N$ of equal masses are suspended from two separate massless springs of force constants $k$ and $k$ respectively. If the two bodies oscillate vertically such that their maximum velocities are equal, the ratio of the amplitude $M$ to that of $N$ is
→A $12 V$ lead accumulator is being charged using $24 V$ supply with an external resistance $2 \Omega$. The internal resistance of the accumulator is $1 \Omega$. Find the time in which it will store $360 W$-hour energy.
→The thermo e.m.f. of a thermo-couple is $25 \mu V /{ }^{\circ} C$ at room temperature. A galvanometer of $40 ohm$ resistance, capable of detecting current as low as $10^{-5} A$, is connected with the thermocouple. The smallest temperature difference that can be detected by this system is
→A wire suspended vertically from one of its ends is stretched by attaching a weight of $200 N$ to the lower end. The weight stretches the wire by $1 mm$ Then the elastic energy stored in the wire is
→If the K.E. of a particle is doubled, then its momentum will
In thermodynamic process, 200 Joules of heat is given to a gas and 100 Joules of work is also done on it. The change in internal energy of the gas is
The depletion layer in the $P-N$ junction region is caused by
→The potential energy of a certain spring when stretched through a distance ' $S$ is 10 joule. The amount of work (in joule) that must be done on this spring to stretch it through an additional distance ' $S$ will be
→The velocity factor of a transmission line $x$. If dielectric constant of the medium is $2.6,$ the value of $x$ is
→