Two bodies $A$ and $B$ of same mass, area and surface finish with specific heats $S_A$ and $S_B\left(S_A > S_B\right)$ are allowed to cool for given temperature range. Temperature varies with time as ..........
- A
- B
- C
- D
Medium
Download our appand get started for free
Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*
Similar Questions
- 1A sphere, a cube and a disc all of the same material, quality and volume are heated to $600\,^oC$ and left in air. Which of these will have the lowest rate of cooling ?View Solution
- 2An incandescent bulb has a thin filament of tungsten that is heated to high temperature by passing an electric current. The hot filament emits black-body radiation. The filament is observed to break up at random locations after a sufficiently long time of operation due to non-uniform evaporation of tungsten from the filament. If the bulb is powered at constant voltage, which of the following statement($s$) is(are) true?View Solution
($A$) The temperature distribution over the filament is uniform
($B$) The resistance over small sections of the filament decreases with time
($C$) The filament emits more light at higher band of frequencies before it breaks up
($D$) The filament consumes less electrical power towards the end of the life of the bulb
- 3The temperatures of two bodies $A$ and $B$ are respectively ${727^o}C$ and ${327^o}C$. The ratio ${H_A}:{H_B}$ of the rates of heat radiated by them isView Solution
- 4A copper rod $2\,m$ long has a circular cross-section of radius $1\, cm$. One end is kept at $100^o\,C$ and the other at $0^o\,C$ and the surface is covered by nonconducting material to check the heat losses through the surface. The thermal resistance of the bar in degree kelvin per watt is (Take thermal conductivity $K = 401\, W/m-K$ of copper):-View Solution
- 5A thin square steel plate with each side equal to $10$ cm is heated by a blacksmith. The rate of radiated energy by the heated plate is $1134 W$ . The temperature of the hot steel plate is ....... $K$ (Stefan's constant $\sigma = 5.67 \times {10^{ - 8}}watt\;{m^{ - 2}}{K^{ - 4}}$, emissivity of the plate = $1$ )View Solution
- 6The energy distribution $E$ with the wavelength $(\lambda )$ for the black body radiation at temperature $T\;Kelvin$is shown in the figure. As the temperature is increased the maxima willView Solution
- 7A composite block is made of slabs $A, B, C, D$ and $E$ of different thermal conductivities (given in terms of a constant $K$ ) and sizes (given in terms of length, $L$ ) as shown in the figure. All slabs are of same width. Heat $'Q'$ flows only from left to right through the blocks. Then in steady state $Image$View Solution
$(A)$ heat flow through $A$ and $E$ slabs are same.
$(B)$ heat flow through slab $E$ is maximum.
$(C)$ temperature difference across slab $E$ is smallest.
$(D)$ heat flow through $C =$ heat flow through $B +$ heat flow through $D$.
- 8For the shown figure, calculate the equivalent thermal resistance if the bricks made of the same material of conductivity $K$View Solution
- 9Two bodies $A$and $B$ have thermal emissivities of $0.01$ and $0.81$ respectively. The outer surface areas of the two bodies are the same. The two bodies emit total radiant power at the same rate. The wavelength ${\lambda _B}$ corresponding to maximum spectral radiancy in the radiation from $B$ is shifted from the wavelength corresponding to maximum spectral radiancy in the radiation from $A$, by $1.00\mu m$. If the temperature of $A$ is $5802\;K$View Solution
- 10The end $A$ of a rod $AB$ of length $1\,m$ is maintained at $80\,^oC$ and the end $B$ at $0\,^oC.$ The temperature at a distance of $60\,\,c.m.$ from the end $A$ is......... $^oC$View Solution