MCQ
Two galvanometers A and B require 3mA and 5mA respectively to produce the same deflection of 10 divisions. Then
- ✓A is more sensitive than B
- BB is more sensitive than A
- CA and B are equally sensitive
- DSensitiveness of B is 5/3 times that of A
✓
Answer
Correct option: A.
A is more sensitive than B
A is more sensitive than B
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Four charges of $1\ \mu C, 2\ \mu C, 3\ \mu C,$ and $- 6\ \mu C$ are placed one at each corner of the square of side $1\,m$. The square lies in the $x-y$ plane with its centre at the origin.
→The work which is required to be done to make an arrangement of four particles each having a charge $+q$ such that the particles lie at the four corners of a square of side $a$ is .......
→The refractive index of water and glass with respect to air is $1.3$ and $1.5$ respectively. Then the refractive index of glass with respect to water is
→An infinitely long thin wire, having a uniform charge density per unit length of $5 nC / m$, is passing through a spherical shell of radius $1 m$, as shown in the figure. A $10 nC$ charge is distributed uniformly over the spherical shell. If the configuration of the charges remains static, the magnitude of the potential difference between points $P$ and $R$, in Volt, is. . . .
→[Given: In SI units $\frac{1}{4 \pi \in_0}=9 \times 10^9, \ln 2=0.7$. Ignore the area pierced by the wire.]
Of the following about capacitive reactance which is correct?
An X-ray tube is operating at 50 kV and 20 mA. The target material of the tube has a mass of 1.0 kg and specific heat $495 \mathrm{~J~kg}^{-1 \circ} \mathrm{C}^{-1}$. One percent of the supplied electric power is converted into X-rays and the entire remaining energy goes into heating the target. Then
→Find potential difference across $24\,\Omega $ ............. $\mathrm{volt}$
→Two samples $A$ and $B$ are initially kept in the same state. Sample $A$ is expanded through an adiabatic process and the sample $B$ through an isothermal process. The final volumes of the samples are the same. The final pressures in $A$ and $B$ are $p_A$ and $p_B$ respectively.
→A sheet of aluminium foil of negligible thickness is introduced between the plates of a capacitor. The capacitance of the capacitor:
Which of the following electromagnetic waves have minimum frequency