MCQ
Vibration magnetometer works on the principle of
- ✓Torque acting on the bar magnet
- BForce acting on the bar magnet
- CBoth the force and the torque acting on the bar magnet
- DNone of these
✓
Answer
Correct option: A.
Torque acting on the bar magnet
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
The number of dry cells, each of e.m.f. $1.5$ volt and internal resistance $0.5 \mathrm{ohm}$ that must be joined in series with a resistance of $20 \mathrm{ohm}$ so as to send a current of $0.6$ ampere through the circuit is
→The $V$-i graph for a conductor makes an angle $\theta$ with $V$-axis. Here $V$ denotes the voltage and $i$ denotes current. The resistance of conductor is given by
→Water rises in a vertical capillary tube upto a height of $2.0 \mathrm{~cm}$. If the tube is inclined at an angle of $60^{\circ}$ with the vertical, then upto what length the water will rise in the tube
→Which one of the following is not used to reduce friction
An electron starting from rest has a velocity that increases linearly with the time that is $v=k t$, where $k=2 m / sec ^2$. The distance travelled in the first 3 seconds will be
→Kepler's second law (law of areas) is nothing but a statement of
The velocity of a bullet is reduced from $200 m / s$ to $100 m / s$ while travelling through a wooden block of thickness $10 cm$. The retardation, assuming it to be uniform, will be
→The physical quantity which has the dimensional formula $M^1 T^{-3}$ is
→In the following star circuit diagram (figure), the equivalent resistance between the points $A$ and $H$ will be
→
The dimensions of universal gas constant is