Question
What is an adiabatic process ? Obtain expressions for the work done by a system (an ideal gas) in an adiabatic process. Also draw the corresponding P-V diagram.

Answer

Get the step-by-step solution for this question inside the Vidyadip app.

Get the answer in the app

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

The resistance of a potentiometer wire is $8 \Omega$ and its length is $8\ m.$ A resistance box and a $2\ V$ battery are connected in series with it. What should be the resistance in the box, if it is desired to have a potential drop of $1 \mu V/mm?$
State the differential equation of linear SHM. Hence, obtain the expressions for the acceleration, velocity and displacement of a particle performing linear SHM.
A solid sphere of radius $R$, rotating with an angular velocity $\omega$ about its diameter, suddenly stops rotating and $75 \%$ of its $\mathrm{KE}$ is converted into heat. If $\mathrm{c}$ is the specific heat capacity of the material in SI units, show that the temperature of $3 \mathrm{R}^2 \mathrm{CO}^2$ the sphere rises by $\frac{3 R^2 \omega^2}{20 c}$.
Explain
(i) a series combination
(ii) a parallel combination of springs. Obtain the spring constant in each case.
A set of three coils having resistances $10 \Omega , 12 \Omega $ and $15 \Omega $ are connected in parallel. This combination is connected in series with series combination of three coils of the same resistances. Calculate the total resistance and current through the circuit, if a battery of emf $4.1$ Volt is used for drawing current.
What is a capacitor?Explain capacitance of a capacitor.
Explain a streamline and streamline flow.
What is a phasor diagram? Illustrate it with an example.
An AC circuit consists of only an inductor of inductance 2 H. If the current is represented by a sine wave of amplitude 0.25 A and frequency 60 Hz, calculate the effective potential difference across the inductor (π = 3.142)
A road at a bend should be banked for an optimum or most safe speed $v_0$. Derive an expression for the required angle of banking.
OR
Obtain an expression for the optimum or most safe speed with which a vehicle can be driven along a curved banked road. Hence show that the angle of banking is independent of the mass of a vehicle.