MCQ
While a capacitor remains connected to a battery and dielectric slab is applied between the plates, then
  • A
    Potential difference between the plates is changed
  • Charge flows from the battery to the capacitor
  • C
    Electric field between the plates increases
  • D
    Energy store in the capacitor decreases

Answer

Correct option: B.
Charge flows from the battery to the capacitor
Charge flows from the battery to the capacitor

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

The potential difference between points A and B of adjoining figure is
Two concentric coils each of radius equal to $2\pi \,{\rm{ }}cm$ are placed at right angles to each other. $3$ $ampere$ and $4$ $ampere$ are the currents flowing in each coil respectively. The magnetic induction in $Weber/{m^2}$ at the centre of the coils will be $({\mu _0} = 4\pi \times {10^{ - 7}}\,Wb/A.m)$
Two resistances are joined in parallel whose resultant is $\frac {6}{8}$ ohm. One of the resistance wire is broken and the effective resistance becomes 2Ω. Then the resistance in ohm of the wire that got broken was
In extrinsic semiconductors
The magnitude of magnetic induction at mid-point $O$ due to current arrangement as shown in Fig will be
A man is $180\,cm$ tall and his eyes are $10\,cm$ below the top of his head. In order to see his entire height right from toe to head, he uses a plane mirror kept at a distance of $1m$ from him. The minimum length of the plane mirror required is.....$cm$
The inductance of a solenoid $0.5 \,m$ long of cross-sectional area $20\, cm^2$ and with $500$ turns is......$mH$
The turn ratio of a transformers is given as $2 : 3$. If the current through the primary coil is $3 \,A$, thus calculate the current through load resistance......$A$
A horizontal parallel beam of light passes through a vertical convex lens of focal length $20 \,cm$ and is then reflected by a tilted plane mirror, so that it converges to a point $I$. The distance $P I$ is $10 \,cm$. $M$ is a point at which the axis of the lens intersects the mirror. The distance $P M$ is $10 \,cm$. The angle which the mirror makes with the horizontal is
Consider the configuration of a system of four charges each of value $+q$ . The work done by external agent in changing the configuration of the system from figure $(1)$ to figure $(2)$ is