Question
Why is gold used in the Gold-leaf electroscope?

Answer

  1. Gold is malleable.
Explanation:
Though gold is a costly metal it is used in electroscope because of the property malleability. This means very thin and light sheets can be formed from gold simply by hammering or rolling and hence the deflection of the light gold plates increases.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Speed of electromagnetic waves in vacuum is:
A signal emitted by an antenna from a certain point can be received at another point of the surface in the form of(a) Sky wave(b) Ground wave(c) Sea wave(d) Both (a) and (b)
       
The frequency of radio waves corresponding to a wavelength of $10m$ is:
$q_1, q_2, q_3$ and $q_4$ are point charges located at points as shown in the figure and $S$ is a spherical Gaussian surface of radius $R$. Which of the following is true according to the Gauss’s law
A heater draws a current of 2A when connected to a 250V source. The rate of energy dissipation is (a) 500 W(b) 1000 W(c) 250 W(d) 125 W
       
Two point charges +9e and +e are at 16 cm away from each other. Where should another charge q be placed between them so that the system remains in equilibrium(a) 24 cm from +9e(b) 12 cm from +9e(c) 24 cm from +e(d) 12 cm from +e
       
Two particle of equal mass $m$ and charge $q$ are placed at a distance of $16 \ cm$. They do not experience any force. The value of $\frac{q}{m}$ is 
A metal block is exposed to beams of X-ray of different wavelength. X-rays of which wavelength penetrate most?
A solenoid of $1.5$ metre length and $4.0 \ cm$ diameter posses $10$ turn per $cm$ . A current of $5$ ampere is flowing through it. The magnetic induction at axis inside the solenoid is
A straight conductor of length $0.4 m$ is moved with a speed of $7\ m/s$ perpendicular to the magnetic field of intensity of $0.9\  Wb/m^2$. The induced e.m.f. across the conductor will be