MCQ
A diatomic gas $(\gamma=1.4)$ does $400 J$ of work when it is expanded isobarically. The heat given to the gas in the process is ............ $J$
  • A
    $1100$
  • B
    $1200$
  • C
    $1300$
  • $1400$

Answer

Correct option: D.
$1400$
d
$Q = nC _{ p } \Delta T =\frac{ n\gamma  }{ \gamma -1} R \Delta T$

$Q =\frac{ \gamma }{\gamma -1}\Delta T =\frac{1.4}{0.4} \times 400=1400 \,J$

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

A particle of mass $m$ moving horizontally with $v_0$ strikes $a$ smooth wedge of mass $M$, as shown in figure. After collision, the ball starts moving up the inclined face of the wedge and rises to $a$ height $h$. When the particle has risen to $a$ height $h$ on the wedge, then choose the correct alternative $(s)$
A car accelerates on a horizontal road due to the forces exerted by
One kg of a diatomic gas is at a pressure of $8 × 10^4\  N/m^2$. The density of the gas is $4\  kg/m^3$. What is the energy of the gas due to its thermal motion ?
A tall cylinder is filled with viscous oil. A round pebble is dropped from the top with zero initial velocity. From the plot shown in indicate the one that represents the velocity (v) of the pebble as a function of time (t):
The phase difference between two points separated by $0.8 m$ in a wave of frequency is $120 Hz$ is $\frac{\pi }{2}.$ The velocity of wave is .....  $m/s$
If the distance between the earth and the sun becomes half its present value, the number of days in a year would have been
Two rings of same mass and radius $R$ are placed with their planes perpendicular to each other and centres at a common point. The radius of gyration of the system about an axis passing through the centre and perpendicular to the plane of one ring is ............
A body of mass $0.25 \,kg$ is projected with muzzle velocity $100\,m{s^{ - 1}}$ from a tank of mass $100\, kg$. What is the recoil velocity of the tank ........ $ms^{-1}$
The dimensions of stress are equal to
Arrange the four graphs in descending order of total work done; where $W _{1}, W _{2}, W _{3}$ and $W _{4}$ are the work done corresponding to figure $a , b , c$ and d respectively.