A non uniformly shaped conductor is charged then at it's sharpest point
Easy
Download our app for free and get started
Potential at every point of a conductor is same but electric field is maximum at shortest point
Download our appand get started for free
Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*
Similar Questions
- 1The effective capacitances of two capacitors are $3\,\mu F$ and $16\,\mu F$, when they are connected in series and parallel respectively. The capacitance of two capacitors areView Solution
- 2Figure shows three points $A$, $B$ and $C$ in a region of uniform electric field $\overrightarrow E $. The line $AB$ is perpendicular and $BC$ is parallel to the field lines. Then which of the following holds good. Where ${V_A} > {V_B}$ and ${V_C}$ represent the electric potential at points $A$, $B$ and $C$ respectivelyView Solution
- 3The electric field between the two parallel plates of a capacitor of $1.5 \mu \mathrm{F}$ capacitance drops to one third of its initial value in $6.6 \mu \mathrm{s}$ when the plates are connected by a thin wire. The resistance of this wire is. . . . . . . .$\Omega$. (Given, $\log 3=1.1)$View Solution
- 4In the $R-C$ circuit shown in the figure the total energy of $3.6 \times 10^{-3}\ J$ is dissipated in the $10$ $\Omega$ resistor when the switch $S$ is closed. The initial charge on the capacitor is.....$\mu C$View Solution
- 5A parallel plate capacitor of plate area $A$ and plate separation $d$ is charged to potential $V$ and then the battery is disconnected. A slab of dielectric constant $k$ is then inserted between the plates of the capacitors so as to fill the space between the plates. If $Q,\;E$ and $W$ denote respectively, the magnitude of charge on each plate, the electric field between the plates (after the slab is inserted) and work done on the system in question in the process of inserting the slab, then state incorrect relation from the followingView Solution
- 6Two capacitors $C_1$ and $C_2$ are charged to $120\ V$ and $200\ V$ respectively. It is found that connecting them together the potential on each one can be made zero. ThenView Solution
- 7A spherical drop of mercury having a potential of $2.5\, V$ is obtained as a result of merging $125$ droplets. The potential of constituent droplets would be........$V$View Solution
- 8The capacitor $'C'$ is initially uncharged. Switch $S_1$ is closed for a long time while $S_2$ remains open. Now at $t = 0$ , $S_2$ is closed while $S_ 1$ is opened. All the batteries are ideal and connecting wires are resistanceless. Find $INCORRECT$ statementView Solution
- 9In the circuit shown in the figure, there are two parallel plate capacitors each of capacitance $C$. The switch $S _1$ is pressed first to fully charge the capacitor $C_1$ and then released. The switch $S_2$ is then pressed to charge the capacitor $C _2$. After some time, $S _2$ is released and then $S _3$ is pressed. After some time.View Solution
$(A)$ the charge on the upper plate of $C _1$ is $2 CV _0$
$(B)$ the charge on the upper plate of $C _1$ is $CV _0$
$(C)$ the charge on the upper plate of $C _2$ is $0$
$(D)$ the charge on the upper plate of $C _2$ is $- CV _0$
- 10The capacity of a parallel plate condenser is $10\,\mu \,F$, when the distance between its plates is $8 \,cm$. If the distance between the plates is reduced to $4\, cm$, then the capacity of this parallel plate condenser will be.........$\mu \,F$View Solution