Question
A unitless quantity:
  1. Never has a non-zero dimension.
  2. Always has a non-zero dimension.
  3. May have a non-zero dimension.
  4. Does not exist.

Answer

  1. Never has a non-zero dimension.

Explanation:

A unitless quantity never has a non-zero dimension.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

A physical quantity is measured and the result is expressed as nu where u is the unit used and n is the numerical value. If the result is expressed in various units then:

  1. $\text{n}\propto\text{size of u}$

  2. $\text{n}\propto\text{u}^2$

  3. $\text{n}\propto\sqrt{\text{u}}$

  4. $\text{n}\propto\frac{1}{\text{u}}$

Calculate the amplification factor of a triode valve that has plate resistance of $2\text{k}\Omega$ and transconductance of 2 millimho.
A bird while flying takes a left turn, where does it get the centripetal force from?
A stone of mass 0.25 kg tied to the end of a string is whirled round in a circle of radius 1.5 m with a speed of 40 rev./min in a horizontal plane. What is the tension in the string? What is the maximum speed with which the stone can be whirled around if the string can withstand a maximum tension of 200 N?
On a winter day when the atmospheric temperature drops to -10°C, ice forms on the surface of a lake.
  1. Calculate the rate of increase of thickness of the ice when 10cm of ice is already formed.
  2. Calculate the total time taken in forming 10cm of ice. Assume that the temperature of the entire water reaches 0°C before the ice starts forming. Density of water = 1000kgm-3, latent heat of fusion of ice $=3.36\times10^5\text{Jkg}^{-1}$ and thermal conductivity of ice $=1.7\text{Wm}^{-1}{^{\circ}}\text{C}^{-1}.$ Neglect the expansion of water on freezing.
When the diode shows saturated current, dynamic place resistance is:
  1. Zero.
  2. Infinity.
  3. Indeterminate.
  4. Different for different diodes.
The amplification factor of a triode operating in the linear region depends strongly on:
  1. The temperature of the cathode.
  2. The plate potential.
  3. The grid potential.
  4. The separations of the grid from the cathode and the anode.
If an automobile engine is overheated, it is cooled by putting water on it. It is advised that the water should be put slowly with engine running. Explain the reason.
A hot body is placed in a closed room maintained at a lower temperature. Is the number of photons in the room increasing?