A voltmeter of resistance $1000\,\Omega$ is connected across a resistance of $500\, \Omega$ in the given circuit. What will be the reading of voltmeter .............. $V$
Medium
Download our app for free and get started
Total current through the circuit
$i = \frac{{10}}{{\frac{{1000}}{3} + 500}} = \frac{3}{{250}}\,A$
Now voltmeter reading $ = {i_v} \times {R_V}$ $ = \frac{2}{3} \times \frac{3}{{250}} \times 500 = 4\,V.$
Download our appand get started for free
Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*
Similar Questions
- 1View SolutionA heater coil is cut into two equal parts and only one part is now used in the heater. The heat generated will now be
- 2You are given a resistance wire of length $50\, cm$ and a battery of negligible resistance. In which of the following cases is largest amount of heat generatedView Solution
- 3View SolutionThe amount of heat produced in a resistor when a current is passed through it can be found using
- 4The potential gradient along the length of a uniform wire is $10\,volt/metre$. $B$ and $C$ are the two points at $30\,cm$ and $60\,cm$ point on a meter scale fitted along the wire. The potential difference between $B$ and $C$ will be ............. $volt$View Solution
- 5In the following star circuit diagram (figure), the equivalent resistance between the points $A$ and $H$ will be ..............$r$View Solution
- 6A potential divider circuit is shown in figure. The output voltage $V_0$ isView Solution
- 7In the given circuit, the equivalent resistance between the terminal $A$ and $B$ is $........\Omega$.View Solution
- 8The resistivity of a potentiometer wire is $40 \times {10^{ - 8}}\,ohm - m$ and its area of cross-section is $8 \times {10^{ - 6}}\,{m^2}$. If $0.2\, amp$ current is flowing through the wire, the potential gradient will beView Solution
- 9What will be the equivalent resistance between the two points $A$ and $D$ ............. $\Omega$View Solution
- 10A $100\, W \, bulb\, B_1$ and two $60\, W \,bulbs \,B_2$ and $B_3$, are connected to a $220\, V$ source, as shown in Figure. Now $P_1, P_2$ and $P_3$ are the output powers of the bulbs $B_1, B_2$ and $B_3$ respectively. ThenView Solution
