MCQ
An alternating voltage $\text{E}=50\sqrt{2}\sin(100\text{t})$ V is connected to a $1\mu\text{F}$ capacitor through an ac ammeter. What will be the reading of the ammeter?
  • A
    $10\text{mA}$
  • B
    $5\text{mA}$
  • C
    $5\sqrt{2}\text{mA}$
  • D
    $10\sqrt{2}\text{mA}$

Answer

  1. $5\text{mA}$

Explanation:

$\text{X}_\text{C}=\frac{1}{\text{C}\omega}=10000\Omega$

ammeater reading $=\text{I}_\text{rms}=\frac{\text{V}_\text{rms}}{\mid\text{jX}_\text{c}\mid}=\frac{50}{10000}=5\text{mA}$

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

A solenoid of length 10cm, diameter 1cm, number of turns 500 with relative permeability of the core 2000, is connected to an ac source of frequency 50 Hz. Then, the reactance is.

In comparison to a half wave rectifier, the full wave rectifier gives lower

(a) Efficiency

(b) Average dc

(c) Average output voltage

(d) None of these

Magnetic lines of force:
The switches in figure are closed at t = 0 and reopened after a long time at t = t0:

  1. The charge on C just after t = 0 is $\in\text{C}.$
  2. The charge on C long after t = 0 is $\in\text{C}.$
  3. The current in L just before t = tis $\frac{\in}{\text{R}}.$
  4. The current in L long after t = t0 is $\frac{\in}{\text{R}}.$
Fusion reaction takes place at very high temperature because:

When a resistance of 2 ohm is connected across the terminals of a cell, the current is 0.5 A. When the resistance is increased to 5 ohm, the current is 0.25 A. The e.m.f. of the cell is

(a) 1.0 V

(b) 1.5 V

(c) 2.0 V

(d) 2.5 V

A beam of plane polarized light falls normally on a polarizer of cross sectional area 3 . Flux of energy of incident ray in 10–3 W. The polarizer rotates with an angular frequency of 31.4 rad/sec. The energy of light passing through the polarizer per revolution will be

(a) 10–4 Joule

(b) 10–3 Joule

(c) 10–2 Joule

(d) 10–1 Joule

Photon and electron are given same energy (. Wavelength associated with photon and electron are   and   then correct statement will be

(a) 

(b)  

(c)  

(d)  

Consider a beam of electrons (each electron with energy E0) incident on a metal surface kept in an evacuated chamber. Then
As the temperature of a metallic resistor is increased, the product of its resistivity and conductivity:
  1. Increases.
  2. Decreases.
  3. Remains constant.
  4. May increase or decrease.