Anvils made of single crystals of diamond, with the shape as shown in Figure, are used to investigate behaviour of materials under very high pressures. Flat faces at the narrow end of the anvil have a diameter of $0.50\; mm$, and the wide ends are subjected to a compressional force of $50,000 \;N$. What is the pressure at the tip of the anvil?
Medium
Download our appand get started for free
Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*
Similar Questions
- 1A thin uniform cylindrical shell, closed at both ends, is partially filled with water. It is floating vertically in water in half-submerged state. If $\rho_0$ is the relative density of the material of the shell with respect to water, then the correct statement is that the shell isView Solution
- 2The relative velocity of two consecutive layers is 8 cm/s. If the perpendicular distance between the layers is $0.1\, cm$, then the velocity gradient will be ......... $sec^{-1}$View Solution
- 3A tube is bent into $L$ shape and kept in a vertical plane. If these three liquids are kept in equilibrium by the piston of area $A$ , the value of $\frac {F}{A}$ isView Solution
- 4A $50 \;kg$ girl wearing high heel shoes balances on a single heel. The heel is circular with a diameter $1.0 \;cm$. What is the pressure exerted by the heel on the horizontal floor ?View Solution
- 5A hydraulic automobile lift is designed to lift cars with a maximum mass of $3000\, kg$. The area of cross section a of piston carrying the load is $425\, cm ^{2}$. What is the maximum pressure () would smaller piston have to bear ?View Solution
- 6A sniper fires a rifle bullet into a gasoline tank making a hole $53.0 m$ below the surface of gasoline. The tank was sealed at $3.10 atm$. The stored gasoline has a density of $660 kgm^{-3}$. The velocity with which gasoline begins to shoot out of the hole is........ $ms^{-1}$View Solution
- 7Two liquids of densities $\rho_{1}$ and $\rho_{2}\left(\rho_{2}=2 \rho_{1}\right)$ are filled up behind a square wall of side $10\; \mathrm{m}$ as shown in figure. Each liquid has a height of $5 \;\mathrm{m} .$ The ratio of the forces due to these liquids exerted on upper part $MN$ to that at the lower pait $NO$ is (Assume that the liquids are not mixing)View Solution
- 8Different heads are in Column - $\mathrm{I}$ and its formulas are given in Column - $\mathrm{II}$. Match them appropriately.View Solution
Column - $\mathrm{I}$ Column - $\mathrm{II}$ $(a)$ Velocity head $(i)$ $\frac{P}{{\rho g}}$ $(b)$ Pressure head $(ii)$ $h$ $(iii)$ $\frac{{{v^2}}}{{2g}}$ - 9$Assertion :$ A thin stainless steel needle can lay floating on a still water surface.View Solution
$Reason :$ Any object floats when the buoyancy force balances the weight of the object - 10A river $10\,m$ deep is flowing at $5\,m/s$. The shearing stress between horizontal layers of the river is :- $(\eta = 10^{-3}\,SI\,unit)$View Solution