Even if a physical quantity depends upon three quantities, out of which two are dimensionally same, then the formula cannot be derived by the method of dimensions. This statement
  • A
    May be true
  • B
    May be false
  • C
    Must be true
  • D
    Must be false
Easy
art

Download our app
and get started for free

Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*

Similar Questions

  • 1
    A dimensionless quantity
    View Solution
  • 2
    In equation $y=x^2 \cos ^2 2 \pi \frac{\beta \gamma}{\alpha}$, the units of $x, \alpha, \beta$ are $m , s ^{-1}$ and $\left( ms ^{-1}\right)^{-1}$ respectively. The units of $y$ and $\gamma$ are
    View Solution
  • 3
    In a Vernier Calipers. $10$ divisions of Vernier scale is equal to the $9$ divisions of main scale. When both jaws of Vernier calipers touch each other, the zero of the Vernier scale is shifted to the left of $zero$ of the main scale and $4^{\text {th }}$ Vernier scale division exactly coincides with the main scale reading. One main scale division is equal to $1\,mm$. While measuring diameter of a spherical body, the body is held between two jaws. It is now observed that zero of the Vernier scale lies between $30$ and $31$ divisions of main scale reading and $6^{\text {th }}$ Vernier scale division exactly. coincides with the main scale reading. The diameter of the spherical body will be $.......cm$
    View Solution
  • 4
    The number of significant figures in the measured value $4.700 \,m$ is the same as that in the value ....... $m$
    View Solution
  • 5
    If ${u_1}$ and ${u_2}$ are the units selected in two systems of measurement and ${n_1}$ and ${n_2}$ their numerical values, then
    View Solution
  • 6
    If the measurement errors in all the independent quantities are known, then it is possible to determine the error in any dependent quantity. This is done by the use of series expansion and truncating the expansion at the first power of the error. For example, consider the relation $z=x / y$. If the errors in $x, y$ and $z$ are $\Delta x, \Delta y$ and $\Delta z$, respectively, then

    $z \pm \Delta z=\frac{x \pm \Delta x}{y \pm \Delta y}=\frac{x}{y}\left(1 \pm \frac{\Delta x}{x}\right)\left(1 \pm \frac{\Delta y}{y}\right)^{-1} .$

    The series expansion for $\left(1 \pm \frac{\Delta y}{y}\right)^{-1}$, to first power in $\Delta y / y$, is $1 \mp(\Delta y / y)$. The relative errors in independent variables are always added. So the error in $z$ will be $\Delta z=z\left(\frac{\Delta x}{x}+\frac{\Delta y}{y}\right)$.

    The above derivation makes the assumption that $\Delta x / x \ll<1, \Delta y / y \ll<1$. Therefore, the higher powers of these quantities are neglected.

    ($1$) Consider the ratio $r =\frac{(1- a )}{(1+ a )}$ to be determined by measuring a dimensionless quantity a.

    If the error in the measurement of $a$ is $\Delta a (\Delta a / a \ll<1)$, then what is the error $\Delta r$ in

    $(A)$ $\frac{\Delta a }{(1+ a )^2}$  $(B)$ $\frac{2 \Delta a }{(1+ a )^2}$  $(C)$ $\frac{2 \Delta a}{\left(1-a^2\right)}$  $(D)$ $\frac{2 a \Delta a}{\left(1-a^2\right)}$

    ($2$) In an experiment the initial number of radioactive nuclei is $3000$ . It is found that $1000 \pm$ 40 nuclei decayed in the first $1.0 s$. For $|x|<1$, In $(1+x)=x$ up to first power in $x$. The error $\Delta \lambda$, in the determination of the decay constant $\lambda$, in $s ^{-1}$, is

    $(A) 0.04$  $(B) 0.03$  $(C) 0.02$  $(D) 0.01$

    Give the answer or quetion ($1$) and ($2$)

    View Solution
  • 7
    The number of significant figure in $6.25\times10^5$ is
    View Solution
  • 8
    Two full turns of the circular scale of screw gauge cover a distance of $1\,mm$ on scale. The total number of divisions on circular scale is $50$. Further, it is found that screw gauge has a zero error of $+0.03\,mm$. While measuring the diameter of a thin wire a student notes the main scale reading of $3\,mm$ and the number of circular scale division in line, with the main scale is $35$. The diameter of the wire is .......... $mm$
    View Solution
  • 9
    Write the dimensions of $a/b$ in the relation $P = \frac{{a - {t^2}}}{{bx}}$ , where $P$ is pressure, $x$ is the distance and $t$ is the time 
    View Solution
  • 10
    While measuring diameter of wire using screw gauge the following readings were noted. Main scale reading is $1 \mathrm{~mm}$ and circular scale reading is equal to $42$ divisions. Pitch of screw gauge is $1 \mathrm{~mm}$ and it has $100$ divisions on circular scale. The diameter of the wire is $\frac{x}{50} \mathrm{~mm}$. The value of $x$ is :
    View Solution