Question
For the given uniform square lamina $ABCD$ whose centre is $O$ , pick incorrect statement
✓
Answer
Get the step-by-step solution for this question inside the Vidyadip app.
Get the answer in the appNeed a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Three capacitors of capacitance $3\,\mu \,F$ are connected in a circuit. Then their maximum and minimum capacitances will be
→$10$ divisions on the main scale of a Vernier calliper coincide with $11$ divisions on the Vernier scale. If each division on the main scale is of $5$ units, the least count of the instrument is :
→A Carnot's engine used first an ideal monoatomic gas then an ideal diatomic gas. If the source and sink temperature are ${411^o}C$ and ${69^o}C$ respectively and the engine extracts $1000\, J $ of heat in each cycle, then area enclosed by the $PV$ diagram is ........ $J$
→If two $+5D$ lenses are mounted at some distance apart, the equivalent power will always be negative if the distance is
→The $B-H$ curve for a ferromagnet is shown in the figure. The ferromagnet is placed inside a long solenoid with $1000\, turns/cm$ . The current that should be passed in the solenoid to demagnetise the ferromagnet completely is
→Two balls of masses ${m_1}$ and ${m_2}$ are separated from each other by a powder charge placed between them. The whole system is at rest on the ground. Suddenly the powder charge explodes and masses are pushed apart. The mass ${m_1}$ travels a distance ${s_1}$ and stops. If the coefficients of friction between the balls and ground are same, the mass ${m_2}$ stops after travelling the distance
→Two masses $m$ and $\frac{m}{2}$ are connected at the two ends of a massless rigid rod of length $l$. The rod is suspended by a thin wire of torsional constant $k$ at the centre of mass of the rodmass system (see figure). Because of torsional constant $k$, the restoring torque is $\tau = k\,\theta $ for angular displacement $\theta $. If the rod is rotated by $\theta _0$ and released, the tension in it when it passes through its mean position will be
→Two equations of two $S.H.M.$ are $y = a\sin \,(\omega \,t - \alpha )$ and $y = b\cos (\omega \,t - \alpha )$. The phase difference between the two is .... $^o$
→Which one of the following modifications may ncrease the sensitivity of moving coil galvanometer?
→$1^{st}$ Way : By using spring of smaller torsion constant.
$2^{nd}$ Way : By using a smaller coil
$3^{rd}$ Way : By using a stronger magnet
$4^{th}$ Way : By using a coil having fewer number of turns.
During superposition of two waves of nearly equal frequencies, beats frequency is defined as the