Given : $\sigma$ is the compressibility of water, $\rho$ is the density of water and $K$ is the  bulk modulus of water. What is the energy density of water at the bottom of a lake $‘h’$  metre deep ?
  • A$\frac{1}{2}\sigma {(h\rho g)^2}$
  • B$\frac{1}{2}\sigma {(h\rho g)}$
  • C$\frac{1}{2}\frac{{h\rho g}}{\sigma }$
  • D$\frac{{h\rho g}}{\sigma }$
Diffcult
art

Download our app
and get started for free

Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*

Similar Questions

  • 1
    A brass rod of cross-sectional area $1\,c{m^2}$ and length $0.2\, m$ is compressed lengthwise by a weight of $5\, kg$. If Young's modulus of elasticity of brass is $1 \times {10^{11}}\,N/{m^2}$ and $g = 10\,m/{\sec ^2}$, then increase in the energy of the rod will be
    View Solution
  • 2
    Two wire $A$ and $B$ are stretched by same force. If, for $A$ and $B, Y_A: Y_B=1: 2, r_A: r_B=3: 1$ and $L_A: L_B=4: 1$, then ratio of their extension $\left(\frac{\Delta L_A}{\Delta L_B}\right)$ will be .............
    View Solution
  • 3
    A wire is loaded by $6\, kg$ at its one end, the increase in length is $12\, mm.$ If the radius of the wire is doubled and all other magnitudes are unchanged, then increase in length will be ......... $mm$
    View Solution
  • 4
    Two blocks of masses $m$ and $M$ are connected by means of a metal wire of cross-sectional area $A$ passing over a frictionless fixed pulley as shown in the figure. The system is then released. If $M = 2\, m$, then the stress produced in the wire is
    View Solution
  • 5
    A vertical hanging bar of length $l$ and mass $m$ per unit length carries a load of mass $M$ at lower end, its upper end is clamped to a rigid support. The tensile stress a distance $x$ from support is $(A \rightarrow$ area of cross-section of bar)
    View Solution
  • 6
    Consider a thin square plate floating on a viscous liquid in a large tank. The height $h$ of the liquid in the tank is much less than the width of the tank. The floating plate is pulled horizontally with a constant velocity $u_0$. Which of the following statements is (are) true?

    $(A)$ The resistive force of liquid on the plate is inversely proportional to $h$

    $(B)$ The resistive force of liquid on the plate is independent of the area of the plate

    $(C)$ The tangential (shear) stress on the floor of the tank increases with $u _0$

    $(D)$ The tangential (shear) stress on the plate varies linearly with the viscosity $\eta$ of the liquid

    View Solution
  • 7
    Two steel wires of same length but radii $r$ and $2r$ are connected together end to end and tied to a wall as shown. The force stretches the combination by $10\ mm$. How far does the midpoint $A$ move ............ $mm$
    View Solution
  • 8
    A cubical solid aluminium (bulk modulus $=-V \frac{ dP }{ dV }=70 GPa$ ) block has an edge length of $1 m$ on the surface of the earth. It is kept on the floor of a $5 km$ deep ocean. Taking the average density of water and the acceleration due to gravity to be $10^3 kg m ^{-3}$ and $10 ms ^{-2}$, respectively, the change in the edge length of the block in $mm$ is . . . . .
    View Solution
  • 9
    Two identical wires of rubber and iron are stretched by the same weight, then the number of atoms in the iron wire will be
    View Solution
  • 10
    When load of $5\,kg$ is hung on a wire then extension of $3\,m$ takes place, then work done will be ....... $joule$
    View Solution