MCQ
Identify the pair whose dimensions are equal
- ✓Torque and work
- BStress and energy
- CForce and stress
- DForce and work
✓
Answer
Correct option: A.
Torque and work
a
(a)
(a)
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A sonometer wire oflength $1.5\ m$ is made of steel. The tension in it produces an elastic strain of $1 \%$. What is the fundamental frequency of steel if density and elasticity of steel are $7.7 \times 10^3 $ $kg/m^3$ and $2.2 \times 10^{11}$ $N/m^2$ respectively?
→If the resultant of the two forces has a magnitude smaller than the magnitude of larger force, the two forces must be
The errors in the measurement which arise due to unpredictable fluctuations in temperature and voltage supply are :
Let Ta and Tb be the final temperatures of the samples A and B, respectively, in the previous question.
- Ta < Tb
- Ta = Tb
- Ta > Tb
- The relation between Ta and Tb cannot be deduced.
In the given figure, a mass $M$ is attached to a horizontal spring which is fixed on one side to a rigid support. The spring constant of the spring is $k$. The mass oscillates on a frictionless surface with time period $T$ and amplitude $A$. When the mass is in equilibrium position, as shown in the figure, another mass $m$ is gently fixed upon it. The new amplitude of oscillation will be
→A simple pendulum consisting of a light inextensible string of length $\ell$ attached to a heavy small bob of mass $m$ is at rest. The bob is imparted a horizontal impulsive force which gives it a speed of $\sqrt{4 g \ell}$. The speed of the bob at its highest point is ( $g$ is the accelaration due to gravity)
→If a cylinder of diameter $1.0\, cm$ at $30°C$ is to be solid into a hole of diameter $0.9997\, cm$ in a steel plate at the same temperature, then minimum required rise in the temperature of the plate is ........ $^oC$ (Coefficient of linear expansion of steel $ = 12 \times {10^{ - 6}}°C^{-1}$)
→A sphere is rolling without slipping on a fixed horizontal plane surface. In the figure, $\mathrm{A}$ is the point of contact, $\mathrm{B}$ is the centre of the sphere and $\mathrm{C}$ is its topmost point. Then,
→$(A)$ $\vec{V}_C-\vec{V}_A=2\left(\vec{V}_B-\vec{V}_C\right)$
$(B)$ $\vec{V}_C-\vec{V}_B=\vec{V}_B-\vec{V}_A$
$(C)$ $\left|\vec{V}_C-\vec{V}_A\right|=2\left|\vec{V}_B-\vec{V}_C\right|$
$(D)$ $\left|\vec{V}_C-\vec{V}_A\right|=4\left|\vec{V}_B\right|$
Stationary waves
An aircraft executes a horizontal loop with a speed of $150\, m/s$ with its wings banked at an angle of $12^o$. The radius of the loop is .......... $km$ $(g = 10\, m/s^2 \; and\; \tan 12^o = 0.2125)$
→