MCQ
If an electron moves from rest from a point at which potential is $50\, volt$ to another point at which potential is $70\, volt$, then its kinetic energy in the final state will be
  • A
    $3.2 × 10^{-10} J$
  • $3.2 × 10^{-18} J$
  • C
    $1\, N$
  • D
    $1 \,dyne$

Answer

Correct option: B.
$3.2 × 10^{-18} J$
b
(b) $\,{\rm{K}}{\rm{.E}}{\rm{.}}\, = {q_0}({V_A} - {V_B}) = 1.6 \times {10^{ - 19}}(70 - 50) = 3.2 \times {10^{ - 18}}J$

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

The correct symbol for zener diode is
 
For the network shown below, the value $V _{ B }- V _{ A }$ is_______ $V$
At Kavalur in India, the astronomers using a telescope whose objective had a diameter of one meter started using a telescope of diameter $2.54 \,m$. This resulted in
Who discovered spin quantum number
Two charges ${q_1}$ and ${q_2}$ are placed in vacuum at a distance $d$ and the force acting between them is $F$. If a medium of dielectric constant $4$ is introduced around them, the force now will be
The actual value of resistance $R$, shown in the figure is $30\,\Omega $. This is measured in an experiment as shown using the standard formula $R = \frac{V}{I}$ where $V$ and $I$ are the readings of the voltmeter and ammeter, respectively. If the measured value of $R$ is $5\%$ less, then the internal resistance of the voltmeter is ................. $\Omega$
In the diagram, the input is across the terminals $A$ and $C$ and the output is across the terminals $ B $ and $D$, then the output is
A parallel$-$plate capacitor is connected to a battery. A metal sheet of negligible thickness is placed between the plates. The sheet remains parallel to the plates of the capacitor:
The plate characteristic curve of a diode in space charge limited region is as shown in the figure. The slope of curve at point $ P$  is $5.0 \,mA/V$ The static plate resistance of diode will be......$\Omega$
If a $30\, V$, $90\, W$ bulb is to be worked on a $120\, V$ line, a resistance of how many ohms should be connected in series with the bulb ............... $ohm$