Question
If $L = 2.331\, cm$, $B = 2.1\, cm$, then $L + B =$

Answer

Step 1 $L=2.331 \mathrm{cm}=2.33$ (corrected to two decimal places) and $B=2.1 \mathrm{cm}$

Step 2 $L+B=2.33+2.1=4.43 \mathrm{cm} .=4.4 \mathrm{cm}$

(by the rule of addition the sum is expressed in minimum decimal places of terms in addition).

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

The work done by the force $\vec F\, = \,{x^2}\hat i\, + {y^2}\hat j$ around the path shown in the figure is
Which is dimensionless
In a Young’s double slit experiment, the separation of the two slits is doubled. To keep the same spacing of fringes, the distance $D $ of the screen from the slits should be made
An electric potential difference will be induced between the ends of the conductor shown in the diagram, when the conductor moves in the direction
A suitable unit for gravitational constant is
On increasing the temperature of a substance gradually, which of the following colours will be noticed by you
A solid disc of radius $20 \,{cm}$ and mass $10\, {kg}$ is rotating with an angular velocity of $600\, {rpm}$, about an axis normal to its circular plane and passing through its centre of mass. The retarding torque required to bring the disc at rest in $10\, {s}\, ......\, \pi \times \,10^{-1}\, {Nm}$.
The pressure of a medium is changed from $1.01 × 10^5$ $Pa$ to $1.165 × 10^5$ $Pa$ and change in volume is $10\% $ keeping temperature constant. The Bulk modulus of the medium is
$A$ ladder of length $L$ is slipping with its ends against a vertical wall and a horizontal floor. At a certain moment, the speed of the end in contact with the horizontal floor is $v$ and the ladder makes an angle $\alpha = 30^o$ with the horizontal. Then the speed of the ladder’s center must be
The distance between a convex lens and a plane mirror is $10 \,cm$. The parallel rays incident on the convex lens after reflection from the mirror form image at the optical centre of the lens. Focal length of lens will be.....$cm$