MCQ
In a projectile motion, velocity at maximum height is
- A$\frac{{u\,\cos \,\theta }}{2}$
- ✓$u\,\cos \,\theta $
- C$\frac{{u\,\sin \,\theta }}{2}$
- DNone of these
✓
Answer
Correct option: B.
$u\,\cos \,\theta $
b
(b)Only horizontal component of velocity $(u\cos \theta )$.
(b)Only horizontal component of velocity $(u\cos \theta )$.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Which of the following statements is correct ?
The speed of a projectile at its maximum height is half of its intial speed. The angle of projection is ......... $^o$
→A helicopter reises from rest on the ground vertically upwards with a constant acceleration $g.$ A food packet is dropped from the helicopter when it is a height $h$. The time taken by the packet to reach the ground is close to $[ g$ is the acceleration due to gravity]
→An ideal monoatomic gas is confined in a horizontal cylinder by a spring loaded piston (as shown in the figure). Initially the gas is at temperature $T _1$, pressure $P_1$ and volume $V_1$ and the spring is in its relaxed state. The gas is then heated very slowly to temperature $T_2$, pressure $P _2$ and volume $V _2$. During this process the piston moves out by a distance $x$. Ignoring the friction between the piston and the cylinder, the correct statement$(s)$ is(are)
→$(A)$ If $V_2=2 V_1$ and $T_2=3 T_1$, then the energy stored in the spring is $\frac{1}{4} P_1 V_1$
$(B)$ If $V_2=2 V_1$ and $T_2=3 T_1$, then the change in internal energy is $3 P_1 V_1$
$(C)$ If $V_2=3 V_1$ and $T_2=4 T_1$, then the work done by the gas is $\frac{7}{3} P_1 V_1$
$(D)$ If $V_2=3 V_1$ and $T_2=4 T_1$, then the heat supplied to the gas is $\frac{17}{6} P_1 V_1$
A person in an elevator acclerating upwards with an acceleration of $2\,ms^{-2}$ , tosses a coin vertically upwards with a speed of $20\,ms^{-1}$ . After how much time will the coin fall back into his hand ? (Take $g = 10\,ms^{-2}$ )
→Consider a $20\, kg$ uniform circular disk of radius $0.2\, m$. It is pin supported at its center and is at rest initially. The disk is acted upon by a constant force $F =20\, N$ through a massless string wrapped around its periphery as shown in the figure.
→Suppose the disk makes n number of revolutions to attain an angular speed of $50\, rad s ^{-1} .$ The value of $n$, to the nearest integer, is.......... [Given : In one complete revolution, the disk rotates by $6.28\, rad$ ]
Sand is being dropped from a stationary dropper at a rate of $0.5\,kgs ^{-1}$ on a conveyor belt moving with a velocity of $5\,ms ^{-1}$. The power needed to keep belt moving with the same velocity will be.
→A string is stretched between fixed points separated by $75.0\ cm$. It is observed to have resonant frequencies of $420\ Hz$ and $315\ Hz.$ There are no other resonant frequencies between these two. Then, the lowest resonant frequency for this string is .... $Hz$
→Internal energy of the working fluid after completing the Carnot cycle:
An iron rod of heat capacity $C$ is heated to temperature $8T_0$ . It is then put in a cylindrical vessel of adiabatic walls having two moles of air which can be treated as diatomic ideal gas at temperature $T_0$ and closed by a movable piston which is also adiabatic. The atmospheric pressure is $P_0$ . The cylinder with the piston combined have heat capacity $2C$ . Find the equilibrium temperature . (Assume temperature of air to be uniform and equal to vessel at all times) .
→