Question

Same current i = 2A is flowing in a wire frame as shown in figure. The frame is a combination of two equilateral triangles ACD and CDE of side 1m. It is placed in uniform magnetic field B = 4T acting perpendicular to the plane of frame. The magnitude of magnetic force acting on the frame is

(a) 24 N

(b) Zero

(c) 16 N

(d)  8 N

Answer

(a) 24 N

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Consider sunlight incident on a pinhole of width $10^3\mathring{\text{A}}$. The image of the pinhole seen on a screen shall be:
Light waves are:
In an insulator, the forbidden energy gap between valence band and conduction band is of the following order :

The voltage gain of a triode depends upon

(a) Filament voltage

(b) Plate voltage

(c) Plate resistance

(d) Plate current

If a spherical conductor comes out from the closed surface of the sphere then total flux emitted from the surface will be

(a)  (the charge enclosed by surface)

(b)  (charge enclosed by surface)

(c)   (charge enclosed by surface)

(d) 0

Assertion :   The stars twinkle while the planets do not.

Reason     :  The stars are much bigger in size than the planets.

(a) If both assertion and reason are true and the reason is the correct explanation of the assertion.

(b) If both assertion and reason are true but reason is not the correct explanation of the assertion.

(c) If assertion is true but reason is false.

(d) If the assertion and reason both are false.

What is the angle between the electric dipole moment $\vec{p}$ and the electric field strength $\vec{E}$ when the dipole is in a stable equilibrium ?
The average acceleration in one time period in a simple harmonic motion is:

  1. $\text{A}\omega^2$

  2. $\frac{\text{A}\omega^2}{2}$

  3. $\frac{\text{A}\omega^2}{\sqrt{2}}$

  4. $\text{Zero}.$

The depletion layer in silicon diode is 1 mm wide and the knee potential is 0.6 V, then the electric field in the depletion layer will be

(a) Zero

(b) 0.6 Vm–1

(c) 6 × 104 V/m

(d) 6 × 105 V/m

A moving coil galvanometer is based on the: