MCQ
Soap helps in cleaning clothes, because
- AChemicals of soap change
- BIt increases the surface tension of the solution
- CIt absorbs the dirt
- ✓It lowers the surface tension of the solution
✓
Answer
Correct option: D.
It lowers the surface tension of the solution
d
(d)Soap helps to lower the surface tension of solution, thus soap get stick to the dust particles and grease and these are removed by action of water.
(d)Soap helps to lower the surface tension of solution, thus soap get stick to the dust particles and grease and these are removed by action of water.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Dimensions of a block are $1\,cm \times 1\,cm \times 100\,cm$. If specific resistance of its material is $3 \times {10^{ - 7}}\,ohm - m$, the resistance between the square faces is
→A projectile is thrown with a velocity of $10\,m / s$ at an angle of $60^{\circ}$ with horizontal. The interval between the moments when speed is $\sqrt{5 g}\,m / s$ is $..........\,s$ $\left(g=10\,m / s ^2\right)$.
→Two particles of masses $m_1$ and $m_2$ in projectile motion have velocities ${\vec v_1}$ and ${\vec v_2}$ respectively at time $t$ = $0$ . they collide at time $t_0$ . Their velocities become ${\vec v_1'}$ and ${\vec v_2'}$ at time $2t_0$ while still moving in air. The value of $\left| {\left( {{m_1}{{\vec v}_1}' + {m_2}{{\vec v}_2}'} \right) - \left( {{m_1}{{\vec v}_1} + {m_2}{{\vec v}_2}} \right)} \right|$ is
→In a $YDSE$ apparatus, we use white light then :
→An oil drop having charge $2e$ is kept stationary between two parallel horizontal plates $2.0\, cm$ apart when a potential difference of $12000\, volts$ is applied between them. If the density of oil is $900 \,kg/m^3$, the radius of the drop will be
→If in a $p -n$ junction diode, a square input signal of $10\ V$ is applied as shown
→The direction of induced e.m.f. during electromagnetic induction is given by
A long solenoid has $200$ turns per cm and carries a current of $2.5\, amps$. The magnetic field at its centre is $({\mu _0} = 4\pi \times {10^{ - 7}}\,weber/amp{\rm{ - }}m)$
→The dimensions of $C{V^2}$ matches with the dimensions of
→An object is placed $0.40 \,m$ from one of the two lenses $L_1$ and $L_2$ of focal lengths $0.20 \,m$ and $0.10 \,m$ respectively, as depicted in the figure. The separation between the lenses is $0.30 \,m$.The final image formed by these two lenses system is at
→