The adjacent graph shows the extension $(\Delta l)$ of a wire of length $1\, m$ suspended from the top of a roof at one end and with a load $W$   connected to the other end. If the cross-sectional area of the wire is $10^{-6}\, m^2$, calculate the Young’s modulus of the material of the wire.
  • A$2\times10^{11}\, N/m^2$
  • B$2\times10^{-11}\, N/m^2$
  • C$3\times10^{-12}\, N/m^2$
  • D$2\times10^{-13}\, N/m^2$
AIIMS 2008, Medium
art

Download our app
and get started for free

Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*

Similar Questions

  • 1
    Join details of Column$-II$ with given information in Column$-I$ appropriately

    Column $-I$  Column $-II$ 

    $(a)$ Stress is proportional to strain.

    $(i)$ Elastic limit
    $(b)$ When the load of the wire is removed, the body does regain its original dimension. $(ii)$ Limit of pro-portionality
      $(iii)$ Plastic deformation
    View Solution
  • 2
    The proportional limit of steel is $8 \times 10^8 \,N / m ^2$ and its Young's modulus is $2 \times 10^{11} \,N / m ^2$. The maximum elongation, a one metre long steel wire can be given without exceeding the elastic limit is $......mm$
    View Solution
  • 3
    Which one of the following substances possesses the highest elasticity
    View Solution
  • 4
    Which of the following relations is true
    View Solution
  • 5
    If the ratio of diameters, lengths and Young's modulus of steel and copper wires shown in the figure are $p, q$ and $s$ respectively, then the corresponding ratio of increase in their lengths would be
    View Solution
  • 6
    On increasing the length by $0.5\, mm$ in a steel wire of length $2\, m$ and area of cross-section $2\,m{m^2}$, the force required is $[Y$ for steel$ = 2.2 \times {10^{11}}\,N/{m^2}]$
    View Solution
  • 7
    A metal block of mass $m$ is suspended from a rigid support through a metal wire of diameter $14\,mm$. The tensile stress developed in the wire under equilibrium state is $7 \times 10^5\,Nm ^{-2}$. The value of mass $m$ is $......kg$.

    (Take, $g =9.8\,ms ^{-2}$ and $\left.\pi=\frac{22}{7}\right)$

    View Solution
  • 8
    In steel, the Young's modulus and the strain at the breaking point are $2 \times {10^{11}}\,N{m^{ - 2}}$ and $0.15$ respectively. The stress at the breaking point for steel is therefore
    View Solution
  • 9
    When a $4\, kg$ mass is hung vertically on a light spring that obeys Hooke's law, the spring stretches by $2\, cms$. The work required to be done by an external agent in stretching this spring by $5\, cms$ will be ......... $joule$       $(g = 9.8\,metres/se{c^2})$
    View Solution
  • 10
    The spring balance does not read properly after its long use, because
    View Solution