MCQ
The lead wires should have
- ✓Larger diameter and low resistance
- BSmaller diameter and high resistance
- CSmaller diameter and low resistance
- DLarger diameter and high resistance
✓
Answer
Correct option: A.
Larger diameter and low resistance
(a)
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Heat given to a system is $35$ joules and work done by the system is $15$ joules. The change in the internal energy of the system will be
→Two solid rubber balls $A$ and $B$ having masses 200 and $400 \mathrm{gm}$ respectively are moving in opposite directions with velocity of $A$ equal to $0.3 \mathrm{~m} / \mathrm{s}$. After collision the two balls come to rest, then the velocity of $B$ is
→For comparing the e.m.f.'s of two cells with a potentiometer, a standard cell is used to develop a potential gradient along the wires. Which of the following possibilities would make the experiment unsuccessful
A vessel contains $110 \mathrm{~g}$ of water. The heat capacity of the vessel is equal to $10 \mathrm{~g}$ of water. The initial temperature of water in vessel is $10^{\circ} \mathrm{C}$. If $220 \mathrm{~g}$ of hot water at $70^{\circ} \mathrm{C}$ is poured in the vessel, the final temperature neglecting radiation loss, will be
→The minimum energy required to remove an electron is called
A particle is executing simple harmonic motion with an amplitude of 0.02 metre and frequency $50 Hz$. The maximum acceleration of the particle is
→The time period of a freely suspended magnet is 4 seconds. If it is broken in length into two equal parts and one part is suspended in the same way, then its time period will be
The atmosphere is held to the earth by
The length of the two rods made up of the same metal and having the same area of cross$-$section are $0.6 \mathrm{~m}$ and $0.8 \mathrm{~m}$ respectively. The temperature between the ends of first rod is $90^{\circ} \mathrm{C}$ and $60^{\circ} \mathrm{C}$ and that for the other rod is $150$ and $110^{\circ} \mathrm{C}$. For which rod the rate of conduction will be greater
→In the half-wave rectifier circuit shown. Which one of the following wave forms is true for $V_{C D}$, the output across $C$ and $D$ ?
→